Yamaha RY20 Owner's Manual - page 108
100
Modifying the Drum Kits
This function lets you copy the current drum kit to another user kit.
1
Place the unit in Drum Kit Mode by pressing the
[DRUM KIT]
button. Select
the drum kit to copy from by rotating the Jog Dial or by using the
[ +1 ]
and
[ –1 ]
buttons.
The kit you just selected is the Source Kit.
2
Select the Copy display page by pressing the
[PAGE+]
or
[PAGE–]
buttons
until the display reads “
COPY SURE?
”. Notice that the “
DRUM KIT
” indicator
is flashing.
3
Select a drum kit from “
20
” to “
39
” to copy to by rotating the Jog Dial or by
using the
[ +1 ]
and
[ –1 ]
buttons.
The kit you just selected is the Destination Kit.
To initiate the copy, press the
[ ENTER ]
button. The “
END
” prompt will
momentarily appear on the display when the copy has finished.
■
Copy
NOTE
You can only copy to the user drum kits “
20
” to “
39
”.
You CANNOT use the
[ COPY ]
button in this case.
If you want to exit this operation without performing the copy, press the
[DRUM KIT]
button or select another display page with the
[PAGE+]
or
[PAGE–]
button.
WARNING
When you press the
[ ENTER ]
button, the copy operation will be performed. It is not
possible to recover data that you have lost.
DRUM KIT
PAGE –
PAGE +
PATTERN
DRUM KIT
A CHASE
DRUM KIT
MAIN A
PAD BANK
OTHERS
HH
SD
BD
ENTER