Yamaha RY20 Owner's Manual - page 112
104
Changing the Effects
The send level is the amount of signal being sent to the DSP for
processing. It is set for each individual drum pad.
1
Select the Send Level display page by pressing the
[ PAGE+ ]
or
[ PAGE– ]
button. The current level flashes under the “
SNDLVL
” prompt.
2
Press the pad you want to modify.
3
Set the send level by rotating the Jog Dial or by using the
[ +1 ]
and
[ –1 ]
buttons.
The range is from “
0
” to “
7
”.
A level of “
7
” is the maximum signal level and a level of “
0
” sends no signal
to the DSP.
■
Send Level
HINT
You can also select another drum kit or pad by changing the focus area with the
[ > ]
cursor button, then selecting a drum kit or pad by rotating the Jog Dial or by
using the
[ +1 ]
and
[ –1 ]
buttons.
NOTE
You can change the Send Level for the individual pads of the preset drum kits.
Your altered settings will stay in effect until you select another drum kit.
PAGE –
PAGE +
PATTERN
EFFECT
A CHASE
DRUM KIT
PAD
MAIN A
PAD BANK
OTHERS
HH
SD
BD