Yamaha RY20 Owner's Manual - page 55
47
Recording a User Pattern
3
Set the number of measures by using the
[ > ]
cursor button to change the
focus to the “
MEASURE
” prompt. Change the number of measures by
rotating the Jog Dial or using the
[ +1 ]
and
[ –1 ]
buttons.
The default length is “
02
” measures. The range is “
01
” measure to “
16
”
measures.
The RY20 has a built-in click sound which sounds on each beat of the
measure to serve as a rhythmic guide when you record in Real-time
Mode. You can change both the volume and the quantization of the
click sound.
1
Select the Click display page by pressing the
[ PAGE+ ]
button until the
display indicates “
CLICK
”.
2
Set the volume by rotating the Jog Dial or using the
[ +1 ]
and
[ –1 ]
buttons.
The default volume level is “
15
”. The range is from “
00
” to “
15
”.
NOTE
The meter and number of measures in a pattern that contains data cannot be
changed. If you try to change these values, the message “
NOT EMPTY
” will
momentarily appear on the display.
■
Adjusting the Click
NOTE
Pressing the
[ +1 ]
and
[ –1 ]
buttons simultaneously resets the level to “
00
”.
PAGE –
PAGE +
PATTERN
A CHASE
LEVEL
QUANTIZE
MAIN A
PAD BANK
OTHERS
HH
SD
BD