Yamaha RY20 Owner's Manual - page 120
112
MIDI Functions
2
Select a channel by rotating the Jog Dial or by using the
[ +1 ]
and
[ –1 ]
buttons.
The channel choices are “
01
” to “
16
” and “
OFF
”. The default channel is
“
10
”. Pressing the
[ +1 ]
and
[ –1 ]
buttons simultaneously resets the
channel to “
10
”.
Use “
OFF
” if you do not want the RY20’s drum instruments to respond to
MIDI commands.
Set the transmission and reception channel for the bass instrument.
1
Select the Bass Instrument display page by pressing the
[PAGE+]
or
[PAGE–]
button. The current channel flashes beside the “
CH
” prompt.
2
Select a channel by rotating the Jog Dial or by using the
[ +1 ]
and
[ –1 ]
buttons.
The channel choices are “
01
” to “
16
” and “
OFF
”. The default channel is
“
01
”. Pressing the
[ +1 ]
and
[ –1 ]
buttons simultaneously resets the
channel to “
01
”.
Select “
OFF
” if you do not want the bass instruments to respond to MIDI
commands.
■
Bass Instrument MIDI Channel
NOTE
If you select the same channel as the drum channel, the drum instruments are given
priority over the bass instruments.
PAGE –
PAGE +
PATTERN
MIDI
A CHASE
MAIN A
PAD BANK
OTHERS
HH
SD
BD