Yamaha RY20 Owner's Manual - page 76
68
Recording a Song
4
Select the next pattern by rotating the Jog Dial or by using the
[ +1 ]
and
[ –1 ]
buttons.
Alternatively, you can select another section. Press and hold the
[SECTION]
button. Then press the drum pad button for the next section you want to
record.
The “
NEXT
” indicator lights up until the current pattern or section has
finished playing.
If the pattern or section you select is empty, the “
EMPTY
” indicator will
also light up.
5
Repeat step 4 until you have recorded all the patterns and sections you
want.
6
Press the
[ STOP ]
button to stop real-time recording. The green Play LED
stops flashing. However, the RY20 is still in record mode, allowing you to
continue adding to your song.
NOTE
If you selected the “
INTRO
” section, it will be recorded and automatically followed
by “
MAIN A
”.
If you select one of the two transition sections, “
FILL AB
” or “
FILL BA
”, they will
play (and be recorded) immediately. If the fill you select is “
FILL AB
”, it will be
followed by “
MAIN B
”. If the fill you select is “
FILL BA
”, it will be followed by
“
MAIN A
”. The fills behave the same as during pattern play. See page 16 for further
details.
If you select the “
ENDING
” section, the RY20 will play (and record) it and stop
real-time recording at the end of the section.
SONG
A
CHASE
SONG
PART
MEASURE
NEXT
PATTERN
MAIN A
PAD BANK
OTHERS
HH
SD
BD
NEXT
EMPTY
PATTERN