Yamaha RY20 Owner's Manual - page 119
111
MIDI Functions
2
Switch from “
INT
” (internal clock, the default) to “
MIDI
” (external MIDI
controller) by rotating the Jog Dial or by using the
[ +1 ]
and
[ –1 ]
buttons.
If you are using the RY20 with an external sequencer, synthesizer, or
other MIDI device, set this function to “
MIDI
”. The external device must
be transmitting an appropriate MIDI clock signal. Note that the
“
MIDI SYNC
” indicator is lit up.
“
INT
” is the normal setting when the RY20 is being used by itself.
Set the transmission and reception channel for the drum instruments.
A separate channel is provided for the bass instrument.
1
Select the Drum Instruments display page by pressing the
[PAGE+]
or
[PAGE–]
button. The current channel flashes beside the “
CH
” prompt.
IMPORTANT
When there is no external MIDI device, this function
MUST
be set to “
INT
”
(internal clock).
■
Drum Instruments MIDI Channel
+
–1
+1
PATTERN
MIDI
MIDI SYNC
A
CHASE
MAIN A
PAD BANK
OTHERS
HH
SD
BD
PAGE –
PAGE +
PATTERN
MIDI
A CHASE
MAIN A
PAD BANK
OTHERS
HH
SD
BD