Yamaha RY20 Owner's Manual - page 114
106
Changing the Effects
The reverb time is the amount of time it takes for the reverberation
simulation to completely subside.
1
Select the Reverb Time display page by pressing the
[ PAGE+ ]
or
[ PAGE– ]
button. The current level flashes under the “
R.TIME
” prompt.
2
Set the reverb time by rotating the Jog Dial or by using the
[ +1 ]
and
[ –1 ]
buttons. The range is from “
00
” to “
31
”.
■
Reverb Time
NOTE
With a setting at or near “
00
”, the reverberation ends quickly, giving you an
artificial, metallic effect. Using a higher setting, for example at or near “
31
”, causes
the reverberation to go on for a long time.
You can change the Reverb Time for the preset drum kits. Your altered setting will
stay in effect until you select another drum kit.
PAGE –
PAGE +
PATTERN
EFFECT
A CHASE
DRUM KIT
MAIN A
PAD BANK
OTHERS
HH
SD
BD