Yamaha RY20 Owner's Manual - page 65
57
Other Pattern Functions
6
Select another section to clear by pressing the appropriate Drum Pad
button while holding the
[SECTION]
button.
■
Copying a Pattern
You can copy the data of any pattern to a user pattern numbered
“
050
” to “
099
”. This allows you, for example, to copy a preset pattern
into a user pattern where you can then modify it.
1
Press the
[PATTERN]
button to put the RY20 into Pattern Mode. Select a
pattern to copy from by rotating the Jog Dial or using the
[ +1 ]
and
[ –1 ]
buttons.
You can select any pattern from “
000
” to “
149
”. The pattern you just
selected is the Source Pattern.
WARNING
When you press the
[ ENTER ]
button the clear operation will be performed. It is not
possible to recover data that you have lost by clearing the pattern.
PLEASE BE CERTAIN THAT THIS IS WHAT YOU INTEND TO DO.
NOTE
If you forget to select any tracks, the RY20 will prompt you with the error message
“
SELECT TRACK
”.
NOTE
The preset patterns “
000
” to “
049
” cannot be cleared. Also note that the pad bank
selection and the tempo, swing, groove, and velocity settings of a user pattern
cannot be cleared.
WARNING
Turning the power off during the execution of the clear function may cause the
irretrievable loss of ALL user data.