Yamaha RY20 Owner's Manual - page 61
53
Other Pattern Functions
All three settings can be reset to their default values by pressing the
[ +1 ]
and
[ –1 ]
buttons simultaneously.
4
Change the focus to the “
LEVEL
” prompt using the
[ > ]
cursor button.
5
Modify the value by rotating the Jog Dial or using the
[ +1 ]
and
[ –1 ]
buttons.
The range is from “
01
” to “
16
” (full effect).
6
Change the focus to the “
TIMING
” prompt using the
[ > ]
cursor button.
7
Modify the value by rotating the Jog Dial or using the
[ +1 ]
and
[ –1 ]
buttons.
The range is from “
01
” (slight delay) to “
16
” (extreme delay).
8
Change the focus to the “
QUANTIZE
” prompt using the
[ > ]
cursor button.
9
Modify the value by rotating the Jog Dial or using the
[ +1 ]
and
[ –1 ]
buttons.
The repeat values are:
•
eighth note.
•
eighth note triplet.
•
16th note.
NOTE
If the “
LEVEL
” setting is inactive, it is indicated with a value of “
---
” on the
display. Press the
[ > ]
cursor button again to skip the inactive setting.
NOTE
If the “
TIMING
” setting is inactive, it is indicated with a value of “
---
” on the
display.
NOTE
If the “
QUANTIZE
” setting is inactive, the note icon at the right-center of the display
will be off.
3