3Com 3C16685 User Manual - page 33
Command Line Interface
33
5 Click in the main HyperTerminal window and press Return twice to
start the communication.
Terminal
Terminal can usually be found from the Main window, in the
Accessories program group. To start a Terminal session (after
connecting to the unit’s console port):
1 Double-click on the ‘Terminal’ icon to start the application.
2 If the Default Serial Port dialog box appears, select the serial port (for
the management station) that you are using to connect to the unit
and click OK.
3 From the Settings menu in the main Terminal window, select Terminal
Emulation. The Terminal Emulation dialog box appears.
4 Select ‘DEC VT-100 (ANSI)’ and click OK.
5 From the Settings menu, select Communications. The
Communications dialog box appears.
6 Configure the fields as follows and click OK:
■
Baud Rate — any setting no higher than 19,200
■
Data Bits — 8
■
Stop Bits — 1
■
Parity — None
■
Flow Control — None
7 Click in the main Terminal window and press Return twice to start
the communication.