3Com 3C16685 User Manual - page 43
Quick Guide to the Commands
43
Entering Commands
When you reach the menu level containing the specific command
you want to enter, you are prompted for a command name.
Commands can also be entered at the end of the menu string.
Where applicable, default values for commands are shown in
parentheses after the prompt. If you press Return for a command
with such a value, the unit continues to use that value.
Returning to the Previous Menu
You can return to the previous menu, by entering
q
at the prompt.
Returning to the Top-level Menu
You can return to the top-level menu by pressing Esc.
Obtaining Help
You can get help at any time by entering
?
at the prompt.
Quick Guide to the Commands
Table 5
lists all the commands available below the top level headings.
Table 5 Command Line Interface Commands
Command
What does it do?
Described
on...
Ethernet Menu
autoNegotiation
Enables and disables auto-negotiation for
ports on the current unit in the stack.
page 56
detail
Displays detailed information and statistics
about a single Ethernet port.
page 56
portMode
Specifies the speed of ports on the current
Hub in the stack.
page 59
portState
Enables and disables ports on the current
unit in the stack.
page 54
security
Allows you to set security on a port.
page 59
(continued)