3Com 3C16685 User Manual - page 72
72
C
HAPTER
3: U
SING
THE
C
OMMAND
L
INE
I
NTERFACE
Enter the trap destination address [
4 Enter the new IP address of the trap destination.
Removing Trap Destination Details
You can remove the details of a current trap destination device using
the
remove
command on the SNMP/Trap menu.
To remove trap destination details:
1 At the Top-level menu, enter:
snmp trap remove
The following prompt is displayed:
Select trap index (1,2,3,all):
2 Enter the index number of the trap destination device that is to have
its details removed, or enter
all
to remove all trap destination
device details.
Displaying and Setting SNMP Object Values
We have provided a set of very powerful SNMP commands for use by
those of wide experience within networking. These commands may
be found in the SNMP menu. Their use will be understood by the
intended manager.
CAUTION: If you are not very familiar with SNMP management, you
will create problems by attempting to use these commands.
If you must know how to use them, use the contacts given in the
SuperStack II Dual Speed Hub 500 User Guide (DUA1661-0AAA0x).