3Com 3C16685 User Manual - page 44
44
C
HAPTER
3: U
SING
THE
C
OMMAND
L
INE
I
NTERFACE
segment
cascade-
Connection
Connects or disconnects a segment from
the cascade unit.
page 64
detail
Displays detailed information and statistics
about a single Ethernet segment.
page 61
label
Allows you to set the name (label) of an
Ethernet segment.
page 61
summary
Displays summary information about a
single Ethernet segment or all segments.
page 63
switch
switchState
Allows you to disable the segment switch
between segments.
page 65
smartAutosensing
Enables and disables Smart auto-sensing for
the stack.
page 65
summary
Displays information about the ports on the
current unit in the stack.
page 54
IP Menu
initializeConfig
Allows you to reset the IP configuration
back to factory defaults. This command
operates on the entire stack.
page 68
interface
bootp
Enables and disables BOOTP for the current
unit in the stack.
page 52
define
Specifies IP and SLIP information for the
current unit in the stack.
page 51
display
Displays IP and SLIP information for the
current unit in the stack.
page 52
ping
Allows you to PING other devices on your
network.
page 68
SNMP Menu
community
Allows you to set the SNMP community
string for all units in a stack.
page 70
get
Performs an SNMP GET instruction, that
allows you to retrieve values of SNMP
objects from the stack.
page 72
next
Performs an SNMP GETNEXT instruction,
that allows you to specify an SNMP object
and then retrieve the next few SNMP
objects from the stack.
page 72
(continued)
Table 5 Command Line Interface Commands (continued)
Command
What does it do?
Described
on...