3Com 3C16685 User Manual - page 45
Quick Guide to the Commands
45
set
Performs an SNMP SET instruction, that
allows you to modify the value of an SNMP
object in the stack.
page 72
trap
define
Specifies the trap destination details for the
stack.
page 70
display
Displays the details of the current trap
destinations for the stack.
page 71
modify
Modifies trap destination details for the
stack.
page 71
remove
Removes trap destination details from the
stack.
page 72
System Menu
capture
Enables and disables RMON Filter capture.
page 67
display
Displays configuration information for the
current unit in the stack.
page 52
information
Allows you to set system name, location
and contact.
page 47
initialize
Resets the unit to its default settings.
page 66
inventory
Lists the units in the stack.
page 53
password
Specifies the password for the current user.
page 46
remoteAccess
Enables and disables all forms of remote
access to the stack.
page 67
reset
Simulates powering off and powering on
the stack.
page 65
security
access display
Displays the access rights for all access
levels in the stack.
page 49
access modify
Modifies the access rights of the access
levels in the stack.
page 49
user define
Specifies the user details for the stack.
page 47
user display
Displays the user details for the stack.
page 48
user modify
Modifies user details for the stack.
page 48
user remove
Removes user details from the stack.
page 49
softwareUpgrade
Upgrades the management agent with a
new version.
page 69
(continued)
Table 5 Command Line Interface Commands (continued)
Command
What does it do?
Described
on...