3Com 3C16685 User Manual - page 71

Commands

71

snmp trap define

You are then prompted to enter the trap community string:

Enter the trap community string [monitor]:

2 You are then prompted to enter the trap destination address:

Enter the trap destination address:

Displaying Trap Destination Details

You can display the community string and IP addresses of the current 

trap destinations using the 

display

 command on the SNMP/Trap 

menu.

To display trap destination details, at the Top-level menu, enter:

snmp trap display

The trap destination details are displayed. 

An example of the information is shown below:

Modifying Trap Destination Details

You can modify the community string and IP address of a current trap 

destination using the 

modify

 command on the SNMP/Trap menu.

To modify trap destination details:

1 At the Top-level menu, enter:

snmp trap modify

The following prompt is displayed:

Select trap index (1,2,3):

2 Enter the index number of the trap destination to be modified.

The following prompt is displayed:

Enter the trap community string [monitor]:

3 Enter the new community string of the trap destination.

The following prompt is displayed:

Index

Community String

Destination Address

1

monitor

192.168.100.1

2

monitor

192.168.100.2

3

monitor

192.168.100.3

4

monitor

192.168.100.4