D-Link DES-2108 User manual - Show Snmp Community
Example usage:
To delete the SNMP community string “admin”:
Figure 89. delete snmp community command
show snmp community
Purpose
Used to display SNMP community strings
configured on the Switch.
Syntax
show snmp community
Description
This command is used to display SNMP
community strings that are configured on the
delete snmp community
Purpose
Used to remove a specific SNMP community
string from the Switch.
Syntax
delete snmp community
20> [ read_only | read_write ]
Description
This command is used to remove a previously
defined SNMP community string from the Switch.
Parameters
previously created SNMP community to be
delete.
read_only - Specifies which previously created
SNMP community of read_only to be delete.
read_write - Specifies which previously created
SNMP community of read_write to be delete.
95