D-Link DES-2108 User manual - Power On
Other manuals for DES-2108:
User Manual, User Manual
Manual is about: Fast Ethernet Switch
of
122
Figure 3. Installing Switch in a rack
Power on
The DES-2108 can be used with AC power sources 100 - 240 VAC,
50 - 60 Hz. The Switch’s power supply will adjust to the local power
source automatically.
Plug one end of the AC power cord into the power connector of the
Switch and the other end into the local power source outlet.
After the Switch is powered on, the LED indicators will momentarily
blink. This blinking of the LED indicators represents a reset of the
system
10