D-Link DES-2108 User manual - Show Stp
Other manuals for DES-2108:
User Manual, User Manual
Manual is about: Fast Ethernet Switch
of
122
the higher the priority. The default is 128.
Example usage:
To configure STP with path cost 10, priority of 100 for ports 1-5:
Figure 85. config stp ports command
show stp
Purpose
Used to display the Switch’s current STP
configuration.
Syntax show
stp
Description
This command displays the Switch’s current STP
configuration.
Parameters
None.
Example usage:
To display the status of STP on the Switch:
90