D-Link DES-2108 User manual - Config System_Name
Other manuals for DES-2108:
User Manual, User Manual
Manual is about: Fast Ethernet Switch
of
122
To configure the Switch will auto log out if there is no user input
for 10 minutes.
Figure 52. config system command
config system_name
Purpose
Used to configure the name for the Switch.
Syntax
config system_name {
Description
The config system_name command configures
the name of the Switch.
Parameters
- A maximum of 20 characters
is allowed.
Example usage:
To configure the Switch name for “Sales-SW-1”:
Figure 53. config system_name command
60