D-Link DES-2108 User manual - Create Snmp Host
Other manuals for DES-2108:
User Manual, User Manual
Manual is about: Fast Ethernet Switch
of
122
Switch.
Example usage:
To display the currently entered SNMP community strings:
Figure 90. show snmp community command
create snmp host
Purpose
Used to create a recipient of SNMP traps
generated by the Switch’s SNMP agent.
Syntax
create snmp host
trap_community
Description
This command creates a recipient of SNMP traps
generated by the Switch’s SNMP agent
Parameters
- The IP address of the remote
management station that will serve as the SNMP
host for the Switch.
SNMP recipient host. The range is between 1 to
4094.
96