D-Link DES-2108 User manual - Login to Web Manager
The section indicates how to manage, control and monitor the Switch
via Web Browser. The Switch to enable its managed functions
including:
Port Setting
Virtual LAN Group setting, Port-based or 802.1Q-based
Port Mirroring
Spanning Tree
SNMP
Static MAC
IGMP Snooping
System Setting
Device Status and Statistic
Trap setting
Password setting
Backup Setting
Reset Setting
Login to Web Manager
Before you configure this device, note that when the Web Smart
Switch is configured through an Ethernet connection, make sure the
manager PC must be set on same the IP network. For example, when
the default IP address of the Web Smart Switch is 192.168.0.1, then
the manager PC should be set at 192.168.0.x (where x is a number
between 2 and 254), and the default subnet mask is 255.255.255.0.
Open the web browser program and Enter IP address
http://192.168.0.1(the factory-default IP address setting) to the
address location.
25