D-Link DES-2108 User manual - Disable Stp
Other manuals for DES-2108:
User Manual, User Manual
Manual is about: Fast Ethernet Switch
of
122
disable stp
Purpose
Used to disable STP on the Switch.
Syntax disable
stp
Description
This command allows the Spanning Tree
Protocol to be disabled on the Switch.
Parameters
None.
Example usage:
To disable STP on the Switch:
Figure 83. disable stp command
config stp
Purpose
Used to setup STP on the Switch.
Syntax
config stp {maxage
Description
This command is used to setup the Spanning
Tree Protocol (STP) for the entire Switch.
Parameters
maxage
ensure that old information does not endlessly
circulate through redundant paths in the network,
preventing the effective propagation of the new
information. Set by the Root Bridge, this value
87