D-Link DES-2108 User manual - Config Pvid
Other manuals for DES-2108:
User Manual, User Manual
Manual is about: Fast Ethernet Switch
of
122
Description
This command allows you to change the VLAN
type to port_based VLAN on the Switch.
Parameters
None.
Example usage:
To switched the VLAN type to Port_based VLAN
Figure 73. disable 802.1q_based vlan command
config pvid
Purpose
Used to configure the 802.1Q Port VLAN ID and
priority.
Syntax
config pvid
<0~7>
Description
This command allows you to configure the
802.1Q Port VLAN ID and priority.
Parameters
- A port or range of ports to configure
to the specified PVID.
VLAN ID to the specified ports.
priority <0~7> - To configure the priority to the
specified PVID.
Example usage:
76