D-Link DES-2108 User manual - Config Location_Name
Other manuals for DES-2108:
User Manual, User Manual
Manual is about: Fast Ethernet Switch
of
122
61
config location_name
Purpose
Used to enter a description of location of the
Switch.
Syntax
config location_name {
Description
The command is used to enter a description of
the location of the Switch. A maximum of 20
characters can be used.
Parameters
- A maximum of 20 characters
is allowed.
Example usage:
To configure the Switch location for “Sales-6F”:
Figure 54. config location_name command
reset
Purpose
Used to reset the Switch to the factory default
setting
Syntax reset
Description
The command is used to restore the Switch’s
configuration to the default setting assigned from
the factory.
Parameters config
- All of the factory default settings are
restored on the Switch including the IP address.