D-Link DES-2108 User manual - Config Discovery Trap_Ip

delete discovery 

trap_event 

{[bootup | illegal_login | t_rx_err | 

t_tx_err| f_rx_err | f_tx_err| 

f_link_change]} 

show discovery trap 

Each command is listed, in detail, in the following sections. 

config discovery trap_ip 

Purpose 

Used to configure an IP address of the trap 

recipient of Web Management Utility to the 

Switch. 

Syntax 

config discovery trap_ip  ipaddress 

{vid } 

Description 

The command is configure an IP address of the 

trap recipient of Web Management Utility to the 

Switch. 

Parameters  

- IP address of the Web 

Management Utility. 

- Specific the 802.1Q VLAN ID of Web 

Management Utility. The range is between 1 to 

4094. 

Example usage: 

To assigned IP address of the Web Configuration Utility to receive 

trap message:  

81