D-Link DES-2108 User manual - page 47
Other manuals for DES-2108:
User Manual, User Manual
Manual is about: Fast Ethernet Switch
of
122
Add Trap: To create a recipient of SNMP traps generated by the
Switch’s SNMP agent, press “Add Trap” button, and the SNMP Trap
Set window will pop out; you can fill in the community name and trap
IP address of the remote management station that will serve as the
SNMP host for the Switch and checked the events selection to enabled
selected event traps.
Figure 32. Add SNMP Trap
Delete Trap: To delete previously defined SNMP Trap, press “Delete
Trap” button, the Delete SNMP Trap Delete configuration window
will pop out; checked the delete dialog box. Press “Apply” to delete
the selected SNMP Trap setting.
Figure 33. Delete SNMP Trap
41