D-Link DES-2108 User manual - Create Snmp Community
93
show snmp
create snmp host
trap_community
delete snmp host
[
show snmp host
enable snmp traps
disable snmp traps
Each command is listed, in detail, in the following sections.
create snmp community
Purpose
Used to create an SNMP community string to
define the relationship between the SNMP
manager and an agent. The community string
acts like a password to permit access to the
agent on the Switch. One or more of the following
characteristics can be associated with the
community string.
Syntax
create snmp community
20> [read_only | read_write]
create snmp community
Description
This command is used to create an SNMP
community string and to assign access-limiting
characteristics to this community string.
Parameters
string of up to 20 characters that is used to
identify members of an SNMP community. This
string is used like a password to give remote
SNMP managers access to MIB objects in the