DAELIM BESBI SC125 - Service Manual - page 137
12-11
FRONT WHEEL/FRONT FORK/STEERING
INSTALLATION
Install the steering head dust seal washer and dust seal
onto the steering stem.
Press in the steering bottom cone race using the
steering stem driver.
Apply grease to the bottom cone race. Install the under
ball assembly onto the bottom cone race making sure
you have the correct amount.
TOOL : STEERING STEM DRIVER
Install the steering bottom and top ball races into the
head pipe.
Insert the front fork into the head pipe.
Install the steering upper ball assembly.
Retighten the top thread to specified torque, then
loosen the top thread
turn.
TORQUE VALUE : 0.15~0.25 kgf m
Recheck that the steering stem moves smoothly
without play or binding.
Tighten the steering stem lock nut temporarily.
TOOLS : STEERING STEM LOCK NUT SOCKET
STEERING STEM SOCKET
Install the front cover.
Insert the handle bar.
Insert the handle cover.