DAELIM BESBI SC125 - Service Manual - Drive Belt
DRIVE BELT
REMOVAL
Remove the LH. crankcase cover.
(
7-2 )
Hold the clutch outer using the universal holder and
remove the nut.
Remove the clutch outer.
TOOL: UNIVERSAL HOLDER
CAUTION
Use the special tool when loosening the lock nut.
Holding the rear wheel or rear brake will damage the
final reduction system.
Squeeze the drive belt into the pulley groove as shown
so that it slackens enough to remove the driven pulley
from the drive shaft.
Loosen the drive face setting nut with the drive face
holder.
Remove the drive face.
TOOL : DRIVE FACE HOLDER
Remove the driven pulley sub assembly with the drive
belt in place.
Remove the drive belt from the driven pulley groove
and drive pulley groove.
7-6
LH. CRANKCASE COVER/KICK STARTER/CONTINUOUSLY VARIABLE TRANSMISSION