DAELIM BESBI SC125 - Service Manual - Engine Removal
6-1
ENGINE REMOVAL
6. ENGINE REMOVAL
SERVICE INFORMATION
6-1
ENGINE REMOVAL
6-2
SERVICE INFORMATION
GENERAL SAFETY
NOTE
Use a jack to remove or install the engine. Support the motorcycle with a jack firmly, taking precautions not to
damage the frame, engine, cable or harness.
Attach tape to the frame to protect it during the engine removal or installation.
The following works can be carried out without removing the engine from the vehicle body.
-TRANSMISSION
SECTION 11
-STARTING CLUTCH
SECTION 8
-OIL PUMP
SECTION 2
-A.C. GENERATOR
SECTION 8
-STARTER MOTOR
SECTION 17
-KICK STARTER/ CONTINUOUSLY VARIABLE TRANSMISSION
SECTION 7
-CYLINDER HEAD/ CYLINDER/ PISTON
SECTION 9,10
-EX. MUFFLER
SECTION 4
-CARBURETOR
SECTION 5
-REAR SWING ARM
SECTION 13
Items to be worked after removing engine.
-CRANKSHAFT, CRANKSHAFT BEARING, CRANK CASE BEARING
Engine oil capacity : 0.9
- when disassembled.
TORQUE VALUES :
ENGINE HANGER BOLT (FRONT) : 2.7
f
m
(REAR) : 3.5
f
m