DAELIM BESBI SC125 - Service Manual - Engine Oil Level Inspection

ENGINE OIL LEVEL INSPECTION

Erect the motorcycle on the main stand.

Warm  up  the  engine  to  heat  the  engine  oil  to  an

appropriate level.

Stop  the  engine,  and  loosen  the  oil  level  gauge  and

check the oil level line. 

ENGINE OIL CHANGE

NOTE

To completely and rapidly drain engine oil, warm up

engine and erect the motorcycle on side stand.

Loosen the oil drain bolt and drain engine oil.

Operate  the  kick  starter  arm  for  several  times  to

remove the remaining oil from the engine.

Tighten the oil drain bolt.

TORQUE VALUE : 2.5 kgf

m

CAUTION

It is extremely important to replace oil filter or clean

the  oil  filter  screen  at  the  first  maintenance  interval

(after 1,000Km).

Clean the oil filter screen every 4,000Km.

Clean the filter screen with fresh cleaning oil.

Check the hole cap O-ring for satisfactory condition

if necessary replace it with new one.

Tighten the hole cap with specified torque.

TORQUE VALUE : 1.5 kgf

m

Fill the recommended engine oil to oil inlet.

OIL CAPACITY : 0.9

(After disassembly)

0.75

(After Oil change)

Tighten the oil level gauge.

API service classification : SL grade.

Start the engine and keep it idle for a few minutes.

Stop the engine and check the oil level. If the oil level

is low, add the recommended engine oil.

Check on oil leaks.

2-3

LUBRICATION