DAELIM BESBI SC125 - Service Manual - Main Switch
MAIN SWITCH
REMOVAL
Remove the front cover.
(
4-3)
Disconnect the main switch coupler.
Release the lock, remove the main key cover.
Remove the seat lock cable.
Loosen the 3 screws and remove the main switch.
Install in the reverse order of removal.
INSPECTION
Check for continuity between the terminals
There should be continuity between the O---O positions
on the continuity chart.
HANDLE BAR SWITCH
INSPECTION
Remove the back mirror.
Remove the wind screen.
(
4-10)
Remove the front handle cover.
(
4-10)
Disconnect the RH./LH. winker wire.
Disconnect the handle bar switch connector and
coupler, check for continuity between the terminals.
There should be continuity between the O---O positions
on the continuity chart.
18-3
STARTER SYSTEM
BLUE
WHITE
COLOR
TERMINAL
LO
(N)
HI
DIMMER SWITCH
SKY BLUE GRAY
ORANGE
COLOR
TERMINAL
R
N
L
WINKER SWITCH
YELLOW/RED
GREEN
COLOR
TERMINAL
FREE
PUSH
STARTER SWITCH
LIGHTS/METER/SWITCHES
BLACK/WHITE
GREEN
RED
BLACK
COLOR
TERMINAL
OFF
ON
LOCK
BROWN/
WHITE
BROWN BLACK
COLOR
TERMINAL
OFF
PO
(N)
H
LIGHTING SWITCH
BROWN/
WHITE