1. DL manuals
  2. Garmin
  3. Tools
  4. Cessna Caravan G1000
  5. Cockpit Reference Manual

Garmin Cessna Caravan G1000 Cockpit Reference Manual

Manual is about: Integrated Flight Deck

Summary of Cessna Caravan G1000

  • Page 1

    G1000 tm cockpit reference guide for the mooney m20m & m20r.

  • Page 2

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r copyright © 2004, 2005 garmin ltd. Or its subsidiaries. All rights reserved. This manual reflects the operation of system software version 0424.10 or later for the mooney m20m and m20r. Some differences in operation may be observed when ...

  • Page 3

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r i warnings, cautions, & notes warning: navigation and terrain separation must not be predicated upon the use of the terrain function. The g1000 terrain proximity feature is not intended to be used as a primary reference for terrain avoi...

  • Page 4

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r ii warnings, cautions, & notes warning: nexrad weather data is to be used for long-range planning purposes only. Due to inherent delays in data transmission and the relative age of the data, nexrad weather data should not be used for sh...

  • Page 5

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r iii warnings, cautions, & notes caution: the garmin g1000 does not contain any user-serviceable parts. Repairs should only be made by an authorized garmin service center. Unauthorized repairs or modifications could void both the warranty...

  • Page 6

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r iv warnings, cautions, & notes this page intentionally left blank..

  • Page 7

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r v record of revisions part number change summary 190-00450-01 reformat of manual. Added wx 500 stormscope added xm weather added adf/dme added extended range fuel tanks changes in eis softkey labels revision date of revision affected pa...

  • Page 8

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r vi record of revisions this page intentionally left blank..

  • Page 9

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r vii table of contents section 1: system overview .................................... 1-1 1.1 pfd/mfd controls ...................................................1-2 1.2 pfd softkeys ........................................................

  • Page 10

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r viii table of contents 7.7 user waypoint information page .......................7-5 7.8 nearest airports .....................................................7-5 nearest airport information on the mfd ...................... 7-5 nearest...

  • Page 11

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r ix table of contents 10.5 skywatch traffic advisory system (tas)(optional) ......................................................10-8 displaying traffic on the traffic map page ................... 10-8 displaying traffic on the navigation m...

  • Page 12

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r x table of contents this page intentionally left blank..

  • Page 13

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 1-1 section 1 system overview 1-1 section 1: system overview the purpose of this cockpit reference guide is to provide the pilot a resource with which to find operat- ing instructions on the major features of the g1000 system more easily...

  • Page 14

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 1-2 section 1 system overview 1.1 pfd/mfd controls figure 1-1 pfd/mfd controls 4 2 1 6 5 7 9 8 3 17 12 13 11 10 16 15 14.

  • Page 15

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 1-3 section 1 system overview (1) nav vol/id knob – controls the nav audio level. Press to toggle the morse code identifier on and off. Volume level is shown in the field as a percentage. (2) nav frequency toggle key – toggles the standby...

  • Page 16

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 1-4 section 1 system overview 1.2 pfd softkeys softkey off softkey on obs tmr/ref nrst inset ident xpdr cdi pfd alerts adf/dme (optional) figure 1-2 pfd top level softkeys inset – press to display the inset map in the lower left corner ...

  • Page 17

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 1-5 section 1 system overview pfd press the std baro or back softkeys to return to the top level softkeys press the dflts softkey to change the pfd metric values to standard arc hsi 360 hsi std baro back alerts brg2 brg1 metric dflts dm...

  • Page 18

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 1-6 section 1 system overview nrst obs tmr/ref ident alerts xpdr stby on back vfr alt code ident 0 1 6 3 2 4 5 7 ident back bksp press the back softkey to return to the top level softkeys press the back softkey to return to the top leve...

  • Page 19

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 1-7 section 1 system overview strmscp (optional) – pressing this softkey displays/removes stormscope lightning data on the navigation map. Nexrad (optional) – pressing this softkey displays/removes precipitation data on the navigation m...

  • Page 20

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 1-8 section 1 system overview 1.4 mfd page groups 1. Turn the large fms knob until the desired page group is selected. 2. Turn the small fms knob to select pages within the group. See figure 1-7. Figure 1-7 page group icon map page grou...

  • Page 21

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 2-1 section 2 flight instruments section 2: flight instruments 6 7 11 14 15 8 13 12 5 3 4 2 1 16 figure 2-1 default pfd information 14 15 11 13 12 9 6 4 2 5 16 7 3 1 nav frequency window airspeed indicator true airspeed box outside air ...

  • Page 22

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 2-2 section 2 flight instruments figure 2-2 additional pfd information 4 7 8 1 3 6 2 10 traffic annunciation 2 4 3 1 8 inset map selected course box 7 alerts window vertical deviation/glideslope indicator marker beacon annunciation selec...

  • Page 23

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 2-3 section 2 flight instruments 2.1 airspeed indicator figure 2-4 airspeed indicator actual airspeed airspeed trend vector true airspeed box speed ranges vspeed references speed indication the indicated airspeed is displayed inside the...

  • Page 24

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 2-4 section 2 flight instruments 2.3 altimeter altitude reference box altitude trend vector current altitude barometric setting box figure 2-7 altimeter altitude reference bug altitude reference bug the altitude reference bug can be set...

  • Page 25

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 2-5 section 2 flight instruments 2.6 vertical speed indicator figure 2-9 vertical speed indicator vertical speed pointer 2.7 horizontal situation indicator (hsi) the hsi compass can be displayed as a 360° rose or 140° arc by pressing th...

  • Page 26

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 2-6 section 2 flight instruments turn rate indicator and heading trend vector each tick mark is at 9 (half standard rate tick mark) and 18 (standard rate tick mark) degrees to the left and right of the lubber line. A wide magenta line d...

  • Page 27

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 2-7 section 2 flight instruments dme radio (optional) to display the dme information window, press the pfd softkey followed by the dme softkey. Figure 2-17 dme information window navigation source to change between navigation sources: 1...

  • Page 28

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 2-8 section 2 flight instruments . This page intentionally left blank..

  • Page 29

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r section 3 – engine indication system (eis) 3-1 section 3: engine indication system (eis) 3.1 engine display in all cases green indicates normal operation, yellow indicates caution, and red indicates warning. Mooney m20r engine displays ...

  • Page 30

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r section 3 – engine indication system (eis) 3-2 3.3 engine system display if desired, use the dec fuel, inc fuel and rst fuel softkeys to adjust the amount of fuel remaining for totalizer calculations. Note: fuel calculations do not use ...

  • Page 31

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 4-1 section 4 – nav/com & transponder section 4: nav/com and transponder the nav/com controls and frequency windows are lo- cated on the primary flight display and the multi-func- tion display in the same locations. Nav controls com con...

  • Page 32

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 4-2 section 4 – nav/com & transponder standby nav frequency field active nav frequency field active com frequency field standby com frequency field figure 4-2 frequency fields selected nav frequency navigation status window tuning box t...

  • Page 33

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 4-3 section 4 – nav/com & transponder 4.1 radio status indications • tx – when a com radio is keyed, a white tx indication appears to the right of the corresponding com frequency. • id – when the morse code identifier is on for a nav rad...

  • Page 34

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 4-4 section 4 – nav/com & transponder dme radio (optional) figure 4-8 radio tuning window to change the dme tuning source: 1. From the tuning window, turn the large fms knob to highlight the dme source field. 2. Turn the small fms knob t...

  • Page 35

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 4-5 section 4 – nav/com & transponder 4.7 transponder mode selection the stby, on and alt softkeys can be accessed by pressing the xpdr softkey. Ground mode (automatic) gnd is displayed when the aircraft is on the ground. Figure 4-11 gr...

  • Page 36

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 4-6 section 4 – nav/com & transponder this page intentionally left blank..

  • Page 37

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 5-1 section 5 – audio panel section 5: audio panel transmitters (com3 mic is unavailable) transceiver audio (com 3 is unavailable) split com (not recommended for use in the m20m/m20r telephone (unavailable) marker beacon/mute passenger ...

  • Page 38

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 5-2 section 5 – audio panel 5.1 com radio selection pressing the com1 mic or com2 mic key selects the active transmitter (i.E., microphone). The associated receiver audio (com1 or com2) also becomes selected when the com mic key is pres...

  • Page 39

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 5-3 section 5 – audio panel figure 5-5 navigation radios 5.4 intercom system (ics) isolation press the pilot and/or coplt key to select who is isolated from hearing the nav/com radios and music. Se- lection scenarios are addressed in ta...

  • Page 40

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 5-4 section 5 – audio panel 5.6 digital clearance recorder with playback capability each reception of primary active com audio is auto- matically recorded in a memory block. When the next transmission is received, it is recorded in the ...

  • Page 41

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r section 6 – automatic flight control 6-1 section 6: automatic flight control refer to the pilot’s guide for the installed autopilot sys- tem..

  • Page 42

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r section 6 – automatic flight control 6-2 this page intentionally left blank..

  • Page 43

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r section 7 – navigation 7-1 section 7: navigation 7.1 navigation map page select the map page group 1. Turn the large fms knob until map is high- lighted in the page group window in the lower right of the mfd display. 2. Turn the small f...

  • Page 44

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r section 7 – navigation 7-2 4. Continue turning the small fms knob to scroll through the list and highlight the desired waypoint or airport. 5. Press the ent key to confirm the selection. Press ent again to activate a direct-to. To re-cen...

  • Page 45

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r section 7 – navigation 7-3 7.3 airport information figure 7-5 airport information page select the airport information page 1. Turn the large fms knob to select the ‘wpt’ page group. Turn the small fms knob to select the first rectangular...

  • Page 46

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r section 7 – navigation 7-4 7.4 intersection information select the intersection information page 1. Turn the large fms knob to select the wpt page group. 2. Turn the small fms knob to select the second rectangular page icon. Figure 7-6 ...

  • Page 47

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r section 7 – navigation 7-5 7.6 vor information figure 7-8 vor information page select the vor information page 1. Turn the large fms knob to select the wpt page group. 2. Turn the small fms knob to select the fourth rectangular page ico...

  • Page 48

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r section 7 – navigation 7-6 access runway information for the selected airport 1. Press the rnwy softkey located at the bottom of the display. 2. Turn the small fms knob to select the desired runway. Quickly tune the com transceiver to a...

  • Page 49

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r section 7 – navigation 7-7 2. Turn the small fms knob to select the second rectangular page icon. View information on the nearest intersection 1. Press the fms knob to activate the cursor. 2. Turn either fms knob to select the desired i...

  • Page 50

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r section 7 – navigation 7-8 select and load a vor frequency 1. With the nearest vor page selected, press the freq softkey to highlight the vor frequency for the selected vor. 2. Press the ent key. The selected vor frequency is placed in ...

  • Page 51

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r section 7 – navigation 7-9 select and load the nearest artcc, fss, or weather frequency 1. With the nearest frequencies page selected, press the artcc, fss, or wx softkey. 2. Turn the large fms knob to select the fre- quency. 3. Press t...

  • Page 52

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r section 7 – navigation 7-10 this page intentionally left blank..

  • Page 53

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 8-1 section 8 – flight planning section 8: flight planning 8.1 user defined waypoints figure 8-1 user wpt information page select the user wpt information page 1. Turn the large fms knob to select the nrst page group. 2. Turn the small ...

  • Page 54

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 8-2 section 8 – flight planning modify a user waypoint 1. With the user waypoint information page displayed, press the fms knob to activate the cursor. 2. Turn the large fms knob to move the cursor to the desired field and turn the small...

  • Page 55

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 8-3 section 8 – flight planning 2. Press the act leg softkey (using mfd only). Or 3. Press the menu key, select the ‘activate leg’ option from the page menu and press the ent key. This step must be used when activating a leg from the pf...

  • Page 56

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 8-4 section 8 – flight planning figure 8-10 create fpl on mfd 3. Turn the small fms knob to display the way- point information page. Turn the small fms knob to enter the first character of the identifier of the departure waypoint. Turn th...

  • Page 57

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 8-5 section 8 – flight planning 8.11 remove a departure, arrival, or approach from a flight plan 1. With the active or stored flight plan page dis- played, press the small fms knob to activate the cursor. 2. Turn the large fms knob to h...

  • Page 58

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 8-6 section 8 – flight planning 3. Turn the large fms knob to highlight ‘invert flight plan’ and press the ent key. The origi- nal flight plan remains intact in its flight plan catalog storage location. 4. With ‘ok’ highlighted, press the...

  • Page 59

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 8-7 section 8 – flight planning 3. The current page mode is displayed at the top of the page: ‘automatic’ or ‘manual’. To change the page mode, press the auto or manual softkey. Figure 8-16 trip planning page 4. For direct-to planning, ...

  • Page 60

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 8-8 section 8 – flight planning this page intentionally left blank..

  • Page 61

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 9-1 section 9 – procedures section 9: procedures 9.1 arrivals and departures load and activate a departure procedure 1. With the navigation map page displayed, press the fpl key. 2. Press the ld dp softkey. If a flight plan is active, th...

  • Page 62

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 9-2 section 9 – procedures 6. A second window is displayed listing available transitions for the arrival. Turn either fms knob to highlight the desired transition waypoint and press the ent key. Figure 9-4 select arrival transition 7. A...

  • Page 63

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 9-3 section 9 – procedures figure 9-7 selecting an approach transition 7. Turn the large fms knob to highlight ‘activate?’ and press the ent key to activate the approach. Selecting ‘load?’ will add the procedure to the flight plan withou...

  • Page 64

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 9-4 section 9 – procedures this page intentionally left blank..

  • Page 65

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 10-1 section 10 – hazard avoidance section 10: hazard avoidance 10.1 customizing the hazard displays on the navigation map 1. With the navigation map page displayed, press the menu key to display the navigation map page menu. The cursor...

  • Page 66

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 10-2 section 10 – hazard avoidance at a map range of less than 25 nm, stormscope light- ning data is not displayed, but can still be present. The presence of stormscope lightning data is indicated by the annunciation ‘ltng figure 10-5 l...

  • Page 67

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 10-3 section 10 – hazard avoidance 2. Press the view softkey. The 360 and arc soft- keys are displayed. Press the 360 softkey to display a 360˚ viewing are or press the arc softkey to display a 120˚ viewing area. Press the clear softkey...

  • Page 68

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 10-4 section 10 – hazard avoidance displaying weather on the weather data link page to select the weather data link page: 1. Turn the large fms knob to select the map page group. 2. Turn the small fms knob to select the fourth rectangul...

  • Page 69

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 10-5 section 10 – hazard avoidance cell mov – pressing the cell mov softkey shows storm cell movement by displaying an arrow. Point- ing in the direction of predicted movement. The display is updated every 12 minutes. Sig/air – pressing...

  • Page 70

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 10-6 section 10 – hazard avoidance • surface analysis • freezing levels • winds aloft • county warnings • cyclone warnings figure 10-10 weather product symbols echo top (cloud top and echo top mutually exclusive) weather product age the...

  • Page 71

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 10-7 section 10 – hazard avoidance 10.4 traffic information service (tis) note: if the g1000 is configured to use the optional skywatch traffic advisory system, tis will not be available for use. Note: traffic information service (tis) is ...

  • Page 72

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 10-8 section 10 – hazard avoidance 10.5 skywatch traffic advisory system (tas)(optional) refer to the skywatch pilot’s guide for a detailed dis- cussion of the skywatch system. Displaying traffic on the traffic map page 1. Turn the large ...

  • Page 73

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 10-9 section 10 – hazard avoidance figure 10-13 tas traffic on navigation map traffic advisory traffic off scale banner non-bearing traffic advisories non-threat traffic 10.6 terrain and obstacle proximity note: terrain data is not displayed...

  • Page 74

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 10-10 section 10 – hazard avoidance unlighted obstacle (height is less than 1000’ agl) lighted obstacle (height is less than 1000’ agl) unlighted obstacle (height is greater than 1000’ agl) lighted obstacle (height is greater than 1000’...

  • Page 75

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r section 11 – abnormal operation 11-1 section 11: abnormal operation 11.1 reversionary mode should a system detected failure occur in either dis- play, the g1000 automatically enters reversionary mode. In reversionary mode, critical fligh...

  • Page 76

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r section 11 – abnormal operation 11-2 11.2 abnormal com operation when a com tuning failure is detected by the system, the emergency frequency (121.500 mhz) is automatically loaded into the active frequency field of the com radio for whic...

  • Page 77

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 12-1 section 12 – annunciations & alerts section 12: annunciations & alerts note: theairplane flight manual supplement supersedes information found in this docu- ment. The g1000 alerting system conveys alerts to the pilot using a combin...

  • Page 78

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 12-2 section 12 – annunciations & alerts 12.1 alert level definitions the g1000 alerting system, as installed in mooney m20m and m20r aircraft, uses one alert level. • message advisory: this level of alert provides general information t...

  • Page 79

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 12-3 section 12 – annunciations & alerts 12.3 g1000 system annunciations when an lru or an lru function fails, a large red ‘x’ is typically displayed on windows associated with the failed data. The following section describes various sy...

  • Page 80

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 12-4 section 12 – annunciations & alerts system annunciation comment display is not receiving altitude input from the air data computer. Display is not receiving vertical speed input from the air data computer. Display is not receiving ...

  • Page 81

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 12-5 section 12 – annunciations & alerts voice alerts voice alert alert trigger “traffic” played when a traffic advisory (ta) is issued (tis system). “traffic not available” played when the traffic system fails or cannot communicate (tis sy...

  • Page 82

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 12-6 section 12 – annunciations & alerts a red ‘x’ may be the result of an lru or an lru func- tion failure. The figure 12-3 illustrates all possible flags and the responsible lrus. 12.4 g1000 system message advisories this section descr...

  • Page 83

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 12-7 section 12 – annunciations & alerts mfd & pfd message advisories message comments data lost – pilot stored data was lost. Recheck settings. The pilot profile data was lost. System reverts to default pilot profile and settings. The pi...

  • Page 84

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 12-8 section 12 – annunciations & alerts database message advisories alerts window message comments mfd1 db err – mfd1 aviation database error exists. The mfd and/or pfd detected a failure in the aviation database. Attempt to reload the...

  • Page 85

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 12-9 section 12 – annunciations & alerts gma 1347 message advisories alerts window message comments gma1 fail – gma1 is inoperative. The audio panel self-test has detected a failure. The audio panel is unavailable. The g1000 system shou...

  • Page 86

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 12-10 section 12 – annunciations & alerts gia 63 message advisories (cont.) alerts window message comments manifest – gia1 software mismatch. Communication halted. The gia1 and/or gia 2 has incorrect software installed. The g1000 system...

  • Page 87

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 12-11 section 12 – annunciations & alerts gia 63 message advisories (cont.) alerts window message comments gps1 service – gps1 needs service. Return unit for repair. A failure has been detected in the gps1 and/or gps2 receiver. The rece...

  • Page 88

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 12-12 section 12 – annunciations & alerts gtx 33 message advisories alerts window message comments xpdr1 config – xpdr1 config error. Config service req’d. The transponder configuration settings do not match those of backup configuration me...

  • Page 89

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 12-13 section 12 – annunciations & alerts gmu 44 message advisories alerts window message comments hdg fault – a magnetometer fault has occurred. A fault has occurred in the gmu 44. Heading is flagged as invalid. The ahrs uses gps for ba...

  • Page 90

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 12-14 section 12 – annunciations & alerts miscellaneous message advisories alerts window message comments fpl wpt lock – flight plan waypoint is locked. Upon power-up, the g1000 system detects that a stored flight plan waypoint is locked...

  • Page 91

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 12-15 section 12 – annunciations & alerts miscellaneous message advisories (cont.) alerts window message comments arspc near – airspace near – less than 2 nm. Special use airspace is within 2 nm of the aircraft position. Leg unsmooth – ...

  • Page 92

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r 12-16 section 12 – annunciations & alerts this page intentionally left blank..

  • Page 93

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r index-1 index a abnormal com operation 11-2 activate a flight plan 8-2 active flight plan 8-2 adf 1-5, 4-3 advisory 12-1 advisory alerts 12-2 age 10-6 ahrs 12-12 aircraft alerts 12-2 airmet 10-5 airport frequency 7-6 airport information 7...

  • Page 94

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r index-2 index message advisories 12-2, 12-7, 12-9, 12-11, 12-12, 12-14, 12-15 metar 10-3, 10-5 mfd 1-1, 4-4 military interceptor operations code 4-5 mkr/mute 5-2 mode selection softkeys 4-5 morse code identifier 4-3 n nav/com controls 4-...

  • Page 95

    Garmin g1000 cockpit reference guide for the mooney m20m & m20r.

  • Page 96

    Garmin international, inc. 1200 east 151st street olathe, ks 66062, u.S.A. P: 913.397.8200 f: 913.397.8282 garmin at, inc. 2345 turner road se salem, or 97302, u.S.A. P: 503.391.3411 f: 503.364.2138 garmin (europe) ltd. Unit 5, the quadrangle abbey park industrial estate romsey, so51 9dl, u.K. P: 44...