Garmin Cessna Caravan G1000 Reference Manual

Manual is about: Integrated Flight Deck

Page of 176

Download

Print this page

Bookmark us

Garmin G1000 Cockpit Reference Guide for Cessna Nav III

SECTION 3 – NAV/COM &

TRANSPONDER

G1000

cockpit reference guide

for Cessna Nav III

1 2 3 4 5 6 7 Next › »

Summary of Cessna Caravan G1000

Page 1
Garmin g1000 cockpit reference guide for cessna nav iii section 3 – nav/com & transponder a g1000 tm cockpit reference guide for cessna nav iii.
Page 2
Garmin g1000 cockpit reference guide for cessna nav iii.
Page 3
Garmin g1000 cockpit reference guide for cessna nav iii i copyright copyright © 2004, 2005 garmin ltd. Or its subsidiaries. All rights reserved. This manual reﬂects the operation of system software versions 0394.00 or later for cessna 172r aircraft, 0395.00 or later for cessna 172s aircraft, 0371.09...
Page 4
Garmin g1000 cockpit reference guide for cessna nav iii ii record of revisions part number change summary 190-00384-03 (rev a) added xm radio and xm weather added dme capability added brg1/brg2 pointers added dual audio panel operation added c172 parameters changed airspeed trend vector changed alti...
Page 5
Garmin g1000 cockpit reference guide for cessna nav iii iii table of contents copyright i record of revisions ii table of contents iii list of figures vi list of tables viii warranty ix warnings and cautions x section 1: introduction 1 1.1 purpose and scope .............................................
Page 6
Garmin g1000 cockpit reference guide for cessna nav iii iv table of contents 3.8 com frequency window ........................................ 41 volume 41 automatic squelch 41 switching the tuning box between com radios 42 manually tuning a com frequency 42 toggling com frequencies 42 selecting a c...
Page 7
Garmin g1000 cockpit reference guide for cessna nav iii v table of contents section 5: multi function display 75 5.1 introduction .............................................................. 75 5.2 mfd description ...................................................... 75 5.3 mfd power-on ............
Page 8
Garmin g1000 cockpit reference guide for cessna nav iii vi table of contents gdl 69a digital audio entertainment interface 133 xm information page 133 data and audio radio id 134 service class 134 weather products 134 xm radio page 135 xm radio interface softkeys 135 active channel 135 channels 135 ...
Page 9
Garmin g1000 cockpit reference guide for cessna nav iii list of figures vii figure 1-1 basic g1000 system ..................................................2 figure 1-2 g1000 optional interfaces ........................................3 figure 1-3 pfd/mfd controls ......................................
Page 10
Garmin g1000 cockpit reference guide for cessna nav iii list of figures viii figure 3-32 top-level softkeys ....................................................56 figure 3-33 mode selection softkeys ..........................................56 figure 3-34 standby mode ..................................
Page 11
Garmin g1000 cockpit reference guide for cessna nav iii ix list of tables list of tables table 4-1 marker beacon signal characteristics ......................66 table 4-2 ics isolation mode transitions ..................................67 table 4-3 ics isolation modes & telephone distribution .........
Page 12
Garmin g1000 cockpit reference guide for cessna nav iii x warranty limited warranty this garmin product is warranted to be free from defects in materials or workmanship for two years from the date of purchase. Within this period, garmin will, at its sole option, repair or replace any components that...
Page 13
Garmin g1000 cockpit reference guide for cessna nav iii xi warnings & cautions warning: navigation and terrain separation must not be predicated upon the use of the terrain function. The g1000 terrain proximity feature is not intended to be used as a primary reference for terrain avoidance and does ...
Page 14
Garmin g1000 cockpit reference guide for cessna nav iii xii warnings & cautions caution: to reduce the risk of unsafe operation, carefully review and understand all aspects of the g1000 pilot’s guide documentation and the g1000 flight manual supplement. Thoroughly practice basic operation prior to a...
Page 15
Garmin g1000 cockpit reference guide for cessna nav iii xiii warnings & cautions warning: trafﬁc information shown on the g1000 multi function display is provided as an aid in visually acquiring trafﬁc. Pilots must maneuver the aircraft based only upon atc guidance or positive visual acquisition of ...
Page 16
Garmin g1000 cockpit reference guide for cessna nav iii xiv warnings & cautions this page intentionally left blank..
Page 17
Garmin g1000 cockpit reference guide for cessna nav iii 1 section 1 – introduction 1 section 1: introduction this document is designed to provide an overview of the g1000 integrated cockpit system as installed in cessna nav iii aircraft. The g1000 system includes the following line re- placeable uni...
Page 18
Garmin g1000 cockpit reference guide for cessna nav iii 2 section 1 – introduction figure 1-1 basic g1000 system no. 1 gia 63 integrated avionics unit system inegration processors i/o processors vhf com vhf nav/loc gps glideslope no. 2 gia 63 integrated avionics unit system integration processors i/...
Page 19
Garmin g1000 cockpit reference guide for cessna nav iii 3 section 1 – introduction high-speed data bus (ethernet) no. 2 gia 63 integrated avionics unit system integration processors i/o processors vhf com vhf nav/loc gps glideslope l3 stormscope lightning strike and thunderstorm detection honeywell ...
Page 20
Garmin g1000 cockpit reference guide for cessna nav iii 4 section 1 – introduction 1.2 pfd/mfd controls figure 1-3 pfd/mfd controls 4 2 1 6 5 7 9 8 3 17 12 13 11 10 16 15 14 nav knob nav vol/id knob nav frequency toggle key heading knob course/baro knob com vol/sq knob com frequency toggle key com k...
Page 21
Garmin g1000 cockpit reference guide for cessna nav iii 5 section 1 – introduction the g1000 controls and keys have been designed to simplify the operation of the system and minimize work- load as well as the time required to access sophisticated functionality. The following list provides an overvie...
Page 22
Garmin g1000 cockpit reference guide for cessna nav iii 6 section 1 – introduction • (15) proc key – selects approaches, departures and arrivals from the ﬂight plan. If a ﬂight plan is used, available procedures for the departure and/or arrival airport are automatically suggested. If a ﬂight plan is...
Page 23
Garmin g1000 cockpit reference guide for cessna nav iii 7 section 1 – introduction 1.4 system power-up while the system begins to initialize, test annuncia- tions are displayed to the pilot at power-up, as shown in figure 1-5 all system annunciations should be cleared within one (1) minute of power-...
Page 24
Garmin g1000 cockpit reference guide for cessna nav iii 8 section 1 – introduction when the mfd powers up, the mfd power-up page displays the following information: • system version • copyright • checklist ﬁlename • land database name and version • obstacle database name and version • terrain databa...
Page 25
Garmin g1000 cockpit reference guide for cessna nav iii 9 section 1 – introduction 1.5 working with menus much of the g1000 operation is accomplished using a menu interface. The g1000 has a bezel-mounted dedicated menu key that when pressed, displays a context-sensitive list of options. This options...
Page 26
Garmin g1000 cockpit reference guide for cessna nav iii 10 section 1 – introduction 1.6 system operation normal mode the pfd and mfd are connected together on a single ethernet bus, allowing for high-speed communication be- tween the two units. Each gia 63 is connected to a single display, as shown ...
Page 27
Garmin g1000 cockpit reference guide for cessna nav iii 11 section 1 – introduction reversionary mode should a failure occur in either display, the g1000 automatically enters reversionary mode. In reversionary mode, all important ﬂight information is shown on the re- maining display. An example of r...
Page 28
Garmin g1000 cockpit reference guide for cessna nav iii 12 section 1 – introduction 1.7 ahrs operation in addition to using internal sensors, the grs 77 ahrs uses gps information, magnetic ﬁeld data and air data to assist in attitude/heading calculations. In normal (prima- ry) mode, the ahrs relies ...
Page 29
Garmin g1000 cockpit reference guide for cessna nav iii 13 section 2 – pfd section 2: primary flight display 2.1 introduction this section of the cockpit reference guide introduces the pilot to the major features of the primary flight display (pfd). A complete description of the pfd with detailed op...
Page 30
Garmin g1000 cockpit reference guide for cessna nav iii 14 section 2 – pfd 2.5 pfd softkeys the pfd softkeys perform the following functions: inset – press to display the inset map in the lower left corner of the pfd. Off – press to disable the inset map. Dcltr (declutter) – press momentarily to sel...
Page 31
Garmin g1000 cockpit reference guide for cessna nav iii 15 section 2 – pfd xpdr – press to display the transponder mode selec- tion softkeys. Stby – press to select standby mode. On – press to select mode a. Alt – press to select altitude reporting mode. Vfr – press to automatically squawk the vfr c...
Page 32
Garmin g1000 cockpit reference guide for cessna nav iii 16 section 2 – pfd figure 2-2b pfd softkeys (2 of 2) pfd press the std baro or back softkeys to return to the top level softkeys press the dflts softkey to change the pfd metric values to standard arc hsi 360 hsi std baro back alerts brg2 brg1 ...
Page 33
Garmin g1000 cockpit reference guide for cessna nav iii 17 section 2 – pfd figure 2-3 default pfd information 8 12 15 16 14 13 18 9 5 3 4 2 1 17 11 15 16 12 14 13 6 4 2 5 17 7 3 1 nav frequency window airspeed indicator true airspeed box outside air temperature box altitude reference box horizontal ...
Page 34
Garmin g1000 cockpit reference guide for cessna nav iii 18 section 2 – pfd figure 2-4 additional pfd information 4 7 8 9 1 3 6 2 11 trafﬁc annunciation 2 4 3 1 8 9 inset map selected course box annunciation window 7 alerts window vertical deviation/glideslope indicator marker beacon annunciation sel...
Page 35
Garmin g1000 cockpit reference guide for cessna nav iii 19 section 2 – pfd 2.6 flight instruments the flight instruments include airspeed, attitude, alti- tude, vertical speed, and heading in a standard aircraft “t” arrangement. This primary display information is com- plemented with other communica...
Page 36
Garmin g1000 cockpit reference guide for cessna nav iii 20 section 2 – pfd true airspeed box the true airspeed box, located below the airspeed in- dicator, displays the true airspeed in knots. Attitude indicator the attitude indicator displays the following informa- tion over a blue virtual sky and ...
Page 37
Garmin g1000 cockpit reference guide for cessna nav iii 21 section 2 – pfd altimeter the altimeter displays barometric altitude values in feet on a rolling number gauge using a moving tape. The altimeter also displays the following additional informa- tion: • current altitude value • altitude refere...
Page 38
Garmin g1000 cockpit reference guide for cessna nav iii 22 section 2 – pfd vertical deviation/glideslope indicator the vertical deviation/glideslope indicator is a win- dow on the left side of the altimeter. The window appears when an ils is tuned in the active nav ﬁeld (and selected on the audio pa...
Page 39
Garmin g1000 cockpit reference guide for cessna nav iii 23 section 2 – pfd horizontal situation indicator (hsi) arc hsi the arc hsi is a 140˚ expanded section of the compass rose. The arc contains a course pointer arrow, to/from indicator, sliding deviation indicator (the to/from and sliding deviati...
Page 40
Garmin g1000 cockpit reference guide for cessna nav iii 24 section 2 – pfd turn rate indicator the turn rate indicator resides directly above the ro- tating compass card. Each tick mark is at 9 (half standard rate) and 18 (standard rate) degrees to the left and right of the lubber line. A wide magen...
Page 41
Garmin g1000 cockpit reference guide for cessna nav iii 25 section 2 – pfd figure 2-17 horizontal situation indicator 8 14 9 6 5 4 3 2 1 7 13 12 11 10 heading bug 2 3 6 4 5 7 1 turn rate indicator navigation source course deviation indicator to/from indicator course pointer rotating compass rose 11 ...
Page 42
Garmin g1000 cockpit reference guide for cessna nav iii 26 section 2 – pfd bearing pointers and information windows pressing the pfd softkey provides access to the brg1 and brg2 softkeys. The brg1 pointer is a single cyan (light blue) line with an open arrowhead at the end. The brg2 pointer is a dou...
Page 43
Garmin g1000 cockpit reference guide for cessna nav iii 27 section 2 – pfd dme radio (optional) the dme information window is displayed by press- ing the pfd softkey followed by the dme softkey. The dme information window is displayed above the brg1 information window. The dme information win- dow d...
Page 44
Garmin g1000 cockpit reference guide for cessna nav iii 28 section 2 – pfd navigation source the hsi can display two sources of navigation, gps or nav (vor, localizer, and glideslope). In gps mode the ﬂight plan legs are sequenced automatically. Enabling obs mode suspends auto sequencing of waypoint...
Page 45
Garmin g1000 cockpit reference guide for cessna nav iii 29 section 2 – pfd true airspeed (tas) box the true airspeed box displays true airspeed in knots. If data is invalid, the box is marked with a red ‘x’ and yel- low text spelling ‘tas’. Figure 2-25 true airspeed box outside air temperature box t...
Page 46
Garmin g1000 cockpit reference guide for cessna nav iii 30 section 2 – pfd 2.7 auxiliary windows the lower right area of the pfd is a shared area that, at any one time, can present the following windows: • timer/references • nearest • direct-to • flight plan • procedures • alerts • pfd setup (lighti...
Page 47
Garmin g1000 cockpit reference guide for cessna nav iii 31 section 2 – pfd nearest airports window the nearest airports window (figure 2-30) is enabled and disabled by pressing the nrst softkey. The nearest airports window displays the following information: • identiﬁer • airport symbol • bearing to...
Page 48
Garmin g1000 cockpit reference guide for cessna nav iii 32 section 2 – pfd direct-to window operations selection of a waypoint for direct-to navigation by: • specifying the identiﬁer, waypoint location, or facility name. • selecting from a list of waypoints in the active ﬂight plan. • selecting from...
Page 49
Garmin g1000 cockpit reference guide for cessna nav iii 33 section 2 – pfd flight plan window operations to display the options menu: 1. Press the menu key. The following flight plan window operations can be performed from the flight plan options menu. • store, invert and delete ﬂight plans • load d...
Page 50
Garmin g1000 cockpit reference guide for cessna nav iii 34 section 2 – pfd inset map the inset map (figure 2-34) is taken directly from the navigation map page on the mfd. It appears in the lower left corner of the pfd and is displayed by pressing the inset softkey. A detailed description of the ins...
Page 51
Garmin g1000 cockpit reference guide for cessna nav iii 35 section 2 – pfd 2.8 additional pfd functionality in addition to the pfd and associated operation, the pfd also contains the following: pfd navigation status bar the pfd navigation status bar (figure 2-35) displays the following information: ...
Page 52
Garmin g1000 cockpit reference guide for cessna nav iii 36 section 2 – pfd 2.9 display backup the pfd is designed to enter a reversionary (backup) mode should one of the displays become unavailable in ﬂight, based on automatic fault monitoring and detection and internal switching. Reversionary mode ...
Page 53
Garmin g1000 cockpit reference guide for cessna nav iii section 3 – nav/com & transponder 37 section 3: nav/com and transponder on both the primary flight display (pfd) and the multi function display (mfd), the g1000 vhf nav/ com window occupies the top portion of the panel. As shown in figure 3-1, ...
Page 54
Garmin g1000 cockpit reference guide for cessna nav iii section 3 – nav/com & transponder 38 3.1 windows and fields on both the pfd and the mfd, the nav and com frequency windows are located at the top of the display on either side of the navigation status bar. • the nav frequency window is displaye...
Page 55
Garmin g1000 cockpit reference guide for cessna nav iii section 3 – nav/com & transponder 39 3.3 color code frequencies located in the active ﬁeld are displayed in either green or white . • an active frequency that is displayed in green indicates that the corresponding radio is selected (i.E., in us...
Page 56
Garmin g1000 cockpit reference guide for cessna nav iii section 3 – nav/com & transponder 40 3.7 controls the controls associated with the nav window are as follows: • a vol/push id knob – turn to adjust the nav radio volume level. – press to turn the morse code identiﬁer on and off. • a frequency t...
Page 57
Garmin g1000 cockpit reference guide for cessna nav iii section 3 – nav/com & transponder 41 3.8 com frequency window the g1000 com radios can be tuned either over the 118.000 to 136.975 mhz frequency range with 25 khz spacing selected or over the 118.000 to 136.990 mhz fre- quency range with 8.33 k...
Page 58
Garmin g1000 cockpit reference guide for cessna nav iii section 3 – nav/com & transponder 42 switching the tuning box between com radios pressing the dual com knob toggles the frequency tuning box between the com1 and com2 ﬁelds. Note: when a different com mic is selected on the audio panel, the fre...
Page 59
Garmin g1000 cockpit reference guide for cessna nav iii section 3 – nav/com & transponder 43 radio status when a com radio is keyed, a white tx indication appears to the right of the active com frequency to indi- cate that a transmission is in progress. The tx indication disappears once com transmis...
Page 60
Garmin g1000 cockpit reference guide for cessna nav iii section 3 – nav/com & transponder 44 3.9 nav frequency window the g1000 nav radios can be tuned over the 108.00 to 117.95 mhz frequency range with 50 khz spacing. The navigation frequency window is located to the left of the navigation status b...
Page 61
Garmin g1000 cockpit reference guide for cessna nav iii section 3 – nav/com & transponder 45 switching the tuning box between nav radios pressing the dual nav knob toggles the frequency tun- ing box between the nav1 and nav2 sub-windows . Pushing the dual nav knob switches the tuning box from one na...
Page 62
Garmin g1000 cockpit reference guide for cessna nav iii section 3 – nav/com & transponder 46 selecting a nav radio the desired nav radio can be selected using the cdi softkey located on the pfd. The three navigation modes that can be selected with the cdi softkey are as follows: • vor1 (or loc1 ) – ...
Page 63
Garmin g1000 cockpit reference guide for cessna nav iii section 3 – nav/com & transponder 47 3.10 optional nav radios optionally, the g1000 system can support up to two (2) remotely-mounted honeywell kn 63 dme transceiv- ers and up to two (2) panel-mounted honeywell kr 87 adf radios. Note: operation...
Page 64
Garmin g1000 cockpit reference guide for cessna nav iii section 3 – nav/com & transponder 48 3.11 frequency auto-tuning the g1000 system offers multiple auto-tuning capabil- ities that help reduce cockpit workload. The pfd allows for the auto-tuning of com frequencies associated with the nearest air...
Page 65
Garmin g1000 cockpit reference guide for cessna nav iii section 3 – nav/com & transponder 49 auto-tuning on the mfd frequencies can be selected and loaded from the fol- lowing mfd pages: • wpt – airport information • wpt – vor information • nrst – nearest airports • nrst – nearest vor • nrst – neare...
Page 66
Garmin g1000 cockpit reference guide for cessna nav iii section 3 – nav/com & transponder 50 to load the desired com frequency into the com tuning box: 1. When the list of frequencies for the selected airport is displayed, highlight the desired fre- quency by turning the large fms knob. 2. Press the...
Page 67
Garmin g1000 cockpit reference guide for cessna nav iii section 3 – nav/com & transponder 51 wpt – vor information page the vor information page displays information spe- ciﬁc to individual vors, including the airport that is near- est to the selected vor. To load a vor frequency into the nav window...
Page 68
Garmin g1000 cockpit reference guide for cessna nav iii section 3 – nav/com & transponder 52 nrst – nearest airports page the nearest airports page displays a list of the nearest airports as well as related runway, frequency and approach information. On this page, any frequency associated with the s...
Page 69
Garmin g1000 cockpit reference guide for cessna nav iii section 3 – nav/com & transponder 53 nrst – nearest vor page the nearest vor page displays a list of the nearest vors together with related information, including the as- sociated vor frequency. To load a vor frequency into the nav window: 1. O...
Page 70
Garmin g1000 cockpit reference guide for cessna nav iii section 3 – nav/com & transponder 54 to view a nearest wx frequency and load it into the standby frequency ﬁeld: 1. Press the wx softkey to activate the selection cursor in the nearest wx window. 2. Turn the fms knob to highlight the desired wx...
Page 71
Garmin g1000 cockpit reference guide for cessna nav iii section 3 – nav/com & transponder 55 figure 3-30 loading an approach to auto-tune a nav frequency if the desired approach is already loaded: 1. Press the proc key to open the procedures window. 2. Turn the large fms knob to highlight the ‘activ...
Page 72
Garmin g1000 cockpit reference guide for cessna nav iii section 3 – nav/com & transponder 56 3.12 transponder on the g1000 system, the gtx 33 transponder inter- face resides on the primary flight display (pfd), on the lower portion of the screen (see ﬁgures below). Transponder softkeys when the xpdr...
Page 73
Garmin g1000 cockpit reference guide for cessna nav iii section 3 – nav/com & transponder 57 mode selection mode selection can either be automatic (ground and altitude modes) or manual (standby, on and altitude modes). The stby , on and alt softkeys can be ac- cessed by pressing the xpdr softkey (se...
Page 74
Garmin g1000 cockpit reference guide for cessna nav iii section 3 – nav/com & transponder 58 reply status when the transponder sends replies to interrogations, an “r” indication appears momentarily in the reply status ﬁeld of the transponder status bar, as shown in figure 3-39. Figure 3-39 reply ind...
Page 75
Garmin g1000 cockpit reference guide for cessna nav iii section 3 – nav/com & transponder 59 when the ident softkey is pressed, a green “idnt” indication is displayed in the mode ﬁeld of the transpon- der status bar (as shown in figure 3-41) for a duration of 18 seconds. This causes the entered iden...
Page 76
Garmin g1000 cockpit reference guide for cessna nav iii section 3 – nav/com & transponder 60 this page intentionally left blank..
Page 77
Garmin g1000 cockpit reference guide for cessna nav iii 61 section 4 – audio panel section 4: audio panel 4.1 introduction this section of the cockpit reference guide describes the major features of the g1000 audio panel (gma 1347) and also contains some basic operating procedures for the most frequ...
Page 78
Garmin g1000 cockpit reference guide for cessna nav iii 62 section 4 – audio panel transmitters transceiver audio marker beacon/mute passenger address marker beacon signal sensitivity speaker vol/sq manual squelch aircraft navigation radio audio (optional, disabled if adf and/or dme are not installe...
Page 79
Garmin g1000 cockpit reference guide for cessna nav iii 63 section 4 – audio panel 4.4 unit operation microphones the gma 1347 features two different microphone channeling modes: • com1 mic • com2 mic note: a push-to-talk (ptt) switch must be pressed to transmit on the selected channel. Each audio p...
Page 80
Garmin g1000 cockpit reference guide for cessna nav iii 64 section 4 – audio panel pressing the com1 or com2 receiver key selects the com radio as an active receiver source. Any combina- tion of radios can be selected separately or simultaneously regardless of the active transceiver selection. The a...
Page 81
Garmin g1000 cockpit reference guide for cessna nav iii 65 section 4 – audio panel marker beacon receiver the gma 1347 marker beacon is used as part of the ils system. The marker beacon receiver is always on and receives at 75 mhz. The gma 1347 provides a marker audio muting capability. The receiver...
Page 82
Garmin g1000 cockpit reference guide for cessna nav iii 66 section 4 – audio panel beacon audio frequency audio keying rate lamp color outer marker 400 hz — — — 2 dashes per second blue middle marker 1,300 hz • — • — 95 dot-dash combinations per minute amber airway/inner marker 3,000 hz • • • • 6 do...
Page 83
Garmin g1000 cockpit reference guide for cessna nav iii 67 section 4 – audio panel navigation radios pressing dme , adf , nav1 , or nav2 selects and deselects the radio source and activates the annuncia- tor. Selected audio can be heard over the headset and the speakers. All radio keys can be select...
Page 84
Garmin g1000 cockpit reference guide for cessna nav iii 68 section 4 – audio panel crew mode crew mode is selected when both the pilot and coplt keys are annunciated. In crew mode, both the pilot and copilot can hear the selected radios and com- municate with each other, while the passengers can onl...
Page 85
Garmin g1000 cockpit reference guide for cessna nav iii 69 section 4 – audio panel mode pilot led coplt led pilot hears copilot hears passenger hears all off off selected radios; pilot; copilot; passengers; music 1 selected radios; pilot; copilot; passengers; music 1 selected radios; pilot; copilot;...
Page 86
Garmin g1000 cockpit reference guide for cessna nav iii 70 section 4 – audio panel volume/squelch control when the gma 1347 man sq key is selected, press- ing the vol/sq knob toggles between volume and squelch adjustment. When the unit is in volume adjust- ment mode, the vol annunciation on the lowe...
Page 87
Garmin g1000 cockpit reference guide for cessna nav iii 71 section 4 – audio panel to adjust ics volume when the man sq key is not annunciated: 1. Turn the appropriate vol/sq knob. To adjust ics volume when the man sq key is annunciated , perform one of the following steps: 1a. If the unit is in man...
Page 88
Garmin g1000 cockpit reference guide for cessna nav iii 72 section 4 – audio panel digital clearance recorder with playback capability the gma 1347 provides a digital clearance recorder with playback capability of up to 2.5 minutes of com sig- nal recording. Recorded com signals are stored in sepa- ...
Page 89
Garmin g1000 cockpit reference guide for cessna nav iii 73 section 4 – audio panel dual panel operation in a dual installation, one gma 1347 is in the pilot position, the other is in the copilot position. The units are referred to as the pilot side and copilot side audio panels. Both the pilot and t...
Page 90
Garmin g1000 cockpit reference guide for cessna nav iii 74 section 4 – audio panel figure 4-10 dual g1000 audio panels (gma 1347) reversionary mode operates on pilot side only speaker not available on copilot’s side pilot side copilot side.
Page 91
Garmin g1000 cockpit reference guide for cessna nav iii 75 section 5 – mfd section 5: multi function display 5.1 introduction this section of the g1000 cockpit reference guide in- troduces the pilot to the major features of the multi func- tion display. A complete description of the mfd with detaile...
Page 92
Garmin g1000 cockpit reference guide for cessna nav iii 76 section 5 – mfd figure 5-1 mfd softkeys back rst used system engine lean engine map dcltr back system lean engine engine lean back system press the engine softkey on any level to return to the lean and system softkey level traffic topo back ...
Page 93
Garmin g1000 cockpit reference guide for cessna nav iii 77 section 5 – mfd 5.6 electronic checklists the g1000 multi function display installed in the cessna nav iii provides normal, abnormal, and emergency checklists which allow a pilot to quickly ﬁnd the proper procedure on the ground and during e...
Page 94
Garmin g1000 cockpit reference guide for cessna nav iii 78 section 5 – mfd removing the check mark from a checklist item press the clr key to remove a check mark from an item. Advancing to the next checklist once the last item in a checklist is selected, the ‘go to the next checklist?’ text is highl...
Page 95
Garmin g1000 cockpit reference guide for cessna nav iii 79 section 5 – mfd 5.7 engine indication system window the engine indication system (eis) display is located on the left portion of the mfd (or on the left portion of any cdu in reversionary mode). The eis window display is a full-time dedicate...
Page 96
Garmin g1000 cockpit reference guide for cessna nav iii 80 section 5 – mfd engine indication system pages pressing the engine softkey makes available the lean and system softkeys which in turn access the lean page and the system page, respectively. Lean page pressing the lean softkey displays the le...
Page 97
Garmin g1000 cockpit reference guide for cessna nav iii 81 section 5 – mfd system page pressing the system softkey displays the following system and fuel calculation information: man in – displays the engine manifold pressure in inches of mercury (hg). Tachometer – displays the current propeller spe...
Page 98
Garmin g1000 cockpit reference guide for cessna nav iii 82 section 5 – mfd 5.8 multi function window the central area of the mfd contains the multi func- tion window, which displays the gps/navigation ﬂight information. Multi function window page groups this guide only describes the map page group, ...
Page 99
Garmin g1000 cockpit reference guide for cessna nav iii 83 section 5 – mfd figure 5-6 page group icon map page group waypoint page group auxiliary page group nearest group selected page number of pages in current group.
Page 100
Garmin g1000 cockpit reference guide for cessna nav iii 84 section 5 – mfd navigation map page the ﬁrst page in the map group is the navigation map page, which displays the following information: • moving map showing airports, airspaces, navaids, land data (roads, lakes, borders, etc.) and labels • ...
Page 101
Garmin g1000 cockpit reference guide for cessna nav iii 85 section 5 – mfd navigation map page operations the following operations (see the g1000 multi func- tion display pilot’s guide for a full listing) can be per- formed from the navigation map page: • changing map feature settings of traffic, to...
Page 102
Garmin g1000 cockpit reference guide for cessna nav iii 86 section 5 – mfd the following is a listing of the features that are turned off at each declutter level: note: “sua” listed in the table below stands for special use airspace. These are controlled airspaces, military zones, etc. Map features ...
Page 103
Garmin g1000 cockpit reference guide for cessna nav iii 87 section 5 – mfd • changing the range of the map : the current map range is indicated in the lower right corner of the display. The map range is adjustable from 500 feet to 2,000 nm. The auto zoom feature is described in the g1000 multi funct...
Page 104
Garmin g1000 cockpit reference guide for cessna nav iii 88 section 5 – mfd trafﬁc map page the trafﬁc map page displays trafﬁc information re- ceived from the trafﬁc information service (tis) only. Trafﬁc is displayed on the trafﬁc map page, the second map page in the navigation map page group. Note...
Page 105
Garmin g1000 cockpit reference guide for cessna nav iii 89 section 5 – mfd terrain proximity page terrain data is displayed on the terrain proximity page, the fourth page in the map group. A color-coded bar scale indicating terrain height is displayed in the lower right corner of the page. Note: ter...
Page 106
Garmin g1000 cockpit reference guide for cessna nav iii 90 section 5 – mfd 5.9 mfd auxiliary pages this section introduces the mfd auxiliary pages. See the g1000 multi function display pilot’s guide for a full description of the auxiliary pages. Flight plan page group the fpl page group includes thr...
Page 107
Garmin g1000 cockpit reference guide for cessna nav iii 91 section 5 – mfd the active flight plan page displays the following in- formation: • flight plan title • flight plan number • a list of waypoints, including the waypoint identi- ﬁer it also displays two of the following, as conﬁgured by the p...
Page 108
Garmin g1000 cockpit reference guide for cessna nav iii 92 section 5 – mfd the following sections provide instructions on entering a ﬂight plan, navigating a ﬂight plan, and editing a ﬂight plan. Complete flight plan page operations are described in the g1000 multi function display pilot’s guide. To...
Page 109
Garmin g1000 cockpit reference guide for cessna nav iii 93 section 5 – mfd direct-to navigation direct-to page the direct-to page allows the user to navigate directly to any point in the internal or user-deﬁned database. It can also be used to obtain information on any point in the database. The dir...
Page 110
Garmin g1000 cockpit reference guide for cessna nav iii 94 section 5 – mfd the following operations can be performed from the direct-to page: • selecting a waypoint for direct-to navigation by specifying: – the identiﬁer – the name – the location • selecting from a list of waypoints in the active ﬂi...
Page 111
Garmin g1000 cockpit reference guide for cessna nav iii 95 section 5 – mfd to select a direct-to destination by facility name or city: 1. Press the direct-to key. The direct-to waypoint page appears with the waypoint identiﬁer ﬁeld highlighted. 2. Turn the large fms knob to highlight the facility na...
Page 112
Garmin g1000 cockpit reference guide for cessna nav iii 96 section 5 – mfd 5.10 introduction to instrument approach procedures arrivals and departures based upon the active ﬂight plan or direct-to destina- tion, the procedures page provides direct access to ap- proaches, departures (dps) and arrival...
Page 113
Garmin g1000 cockpit reference guide for cessna nav iii 97 section 5 – mfd approaches the g1000 allows you to ﬂy non-precision and pre- cision approaches to airports with published instrument approach procedures. All available approaches are part of the jeppesen database stored internally in each pf...
Page 114
Garmin g1000 cockpit reference guide for cessna nav iii 98 section 5 – mfd selecting approaches in order to select an approach, there must be an active direct-to or ﬂight plan which terminates at an airport with a published approach. To select an approach: 1. Press the proc key to display the proced...
Page 115
Garmin g1000 cockpit reference guide for cessna nav iii 99 section 5 – mfd not all approaches in the database are approved for gps use. As you select an approach, a “gps” designation to the right of the procedure name indicates the procedure can be ﬂown using the gps receiver. Some procedures will n...
Page 116
Garmin g1000 cockpit reference guide for cessna nav iii 100 section 5 – mfd gps approach examples no procedure turn an approach where there is typically no procedure turn required to get established on the inbound course to the faf is our example. We use gps rwy 12 to show how the g1000 sequences th...
Page 117
Garmin g1000 cockpit reference guide for cessna nav iii 101 section 5 – mfd figure 5-16 approach with no procedure turn repr oduced with permission of j eppesen sander son, inc . Not to be used for navigation..
Page 118
Garmin g1000 cockpit reference guide for cessna nav iii 102 section 5 – mfd flying the missed approach when you reach the map, execute the missed ap- proach procedure. The g1000 continues to give guid- ance along an extension of the ﬁnal course segment (faf to map) until you manually initiate the mi...
Page 119
Garmin g1000 cockpit reference guide for cessna nav iii 103 section 5 – mfd figure 5-17 flying the missed approach repr oduced with permission of j eppesen sander son, inc . Not to be used for navigation..
Page 120
Garmin g1000 cockpit reference guide for cessna nav iii 104 section 5 – mfd flying the procedure turn the procedure turn portion of the approach is stored as one of the legs of the approach. For this reason the g1000 requires no special operations from the pilot (oth- er than ﬂying the procedure tur...
Page 121
Garmin g1000 cockpit reference guide for cessna nav iii 105 section 5 – mfd 14. As you approach the map, a waypoint message (arriving at waypoint) appears. 15. As you reach the map, “susp” appears in the hsi and directly above the susp softkey, indi- cating that automatic sequencing of approach wayp...
Page 122
Garmin g1000 cockpit reference guide for cessna nav iii 106 section 5 – mfd flying the dme arc the gps overlay for a dme arc approach uses ad- ditional jeppesen provided waypoints to deﬁne the arc. When cleared for a dme arc approach, you may do either of the following to intercept the arc: • follow...
Page 123
Garmin g1000 cockpit reference guide for cessna nav iii 107 section 5 – mfd figure 5-19 flying the dme arc repr oduced with permission of j eppesen sander son, inc . Not to be used for navigation..
Page 124
Garmin g1000 cockpit reference guide for cessna nav iii 108 section 5 – mfd flying the holding pattern this example is based upon a missed approach from ksop (moore county, nc). Now you’ve decided to divert to kigx (chapel hill, nc) instead. You select the rnav (gps) rwy 9 approach into kigx. The rn...
Page 125
Garmin g1000 cockpit reference guide for cessna nav iii 109 section 5 – mfd as you cross the map, “susp” appears in the hsi and directly above the susp softkey, indicating that auto- matic sequencing of approach waypoints is suspended at the map. A “from” indication is displayed on the cdi, but cour...
Page 126
Garmin g1000 cockpit reference guide for cessna nav iii 110 section 5 – mfd 5.11 mfd navigation status window the mfd navigation status window is located be- tween the com and nav frequency windows at the top of the mfd. The mfd navigation status window displays four user conﬁgurable ﬁelds which sho...
Page 127
Garmin g1000 cockpit reference guide for cessna nav iii 111 section 6 – mfd optional interfaces section 6: multi function display optional interfaces 6.1 introduction this section of the cockpit reference guide introduces the pilot to the major features of the optional interfaces to the multi functi...
Page 128
Garmin g1000 cockpit reference guide for cessna nav iii 112 section 6 – mfd optional interfaces stormscope lightning data display range stormscope lightning data can be displayed up to 800 nm zoom range (north up) on the naviga- tion map page. In the ‘track up’ mode there is a portion of stormscope ...
Page 129
Garmin g1000 cockpit reference guide for cessna nav iii 113 section 6 – mfd optional interfaces to change the display range on the navigation map page, turn the joystick clockwise to zoom out or turn the joystick counter-clockwise to zoom in. Note: at a map range of less than 25 nm, stormscope light...
Page 130
Garmin g1000 cockpit reference guide for cessna nav iii 114 section 6 – mfd optional interfaces to select ‘cell’ or ‘strike’ as the stormscope lightning mode: 1. With the weather group selected, press the ent key. The cursor ﬂashes on ‘strmscp ltng’. 2. Turn the large fms knob to select ‘strmscp mod...
Page 131
Garmin g1000 cockpit reference guide for cessna nav iii 115 section 6 – mfd optional interfaces the stormscope page displays the following information: • map showing surrounding lightning strikes (in strike or cell mode), current aircraft location, and range marking rings, in 360° mode or 120° mode ...
Page 132
Garmin g1000 cockpit reference guide for cessna nav iii 116 section 6 – mfd optional interfaces stormscope page operations the following stormscope page operations can be per- formed using softkeys or page menu options: • change display range • change the lightning mode between cell and strike • cha...
Page 133
Garmin g1000 cockpit reference guide for cessna nav iii 117 section 6 – mfd optional interfaces 6.3 weather and digital audio entertainment interface the gdl 69 is a remote sensor that is capable of receiving xm weather and displaying it on the g1000 multi function display and the primary flight dis...
Page 134
Garmin g1000 cockpit reference guide for cessna nav iii 118 section 6 – mfd optional interfaces gdl 69 weather interface flight information services (fis) weather information provided by the gdl 69 is displayed on the following mfd maps and pages: • navigation map page (nexrad and xm lightning only)...
Page 135
Garmin g1000 cockpit reference guide for cessna nav iii 119 section 6 – mfd optional interfaces displaying weather data on the navigation map page when appropriately conﬁgured, the navigation map page displays nexrad, cell movement, tfrs, and xm lightning data. This capability improves situational a...
Page 136
Garmin g1000 cockpit reference guide for cessna nav iii 120 section 6 – mfd optional interfaces navigation map setup options the user can customize the display of gdl 69 weather data on the navigation map page by using the map setup weather group options menu. The following options are available: • ...
Page 137
Garmin g1000 cockpit reference guide for cessna nav iii 121 section 6 – mfd optional interfaces to customize the navigation map page: 1. On the navigation map page, press the menu key. 2. While the ‘map setup’ selection is highlighted on the page menu, press the ent key. 3. Turn the small fms knob t...
Page 138
Garmin g1000 cockpit reference guide for cessna nav iii 122 section 6 – mfd optional interfaces displaying metar and taf information on the airport information page metar and taf text is displayed on the airport infor- mation page when the wx softkey is pressed. Once the wx softkey is pressed the pa...
Page 139
Garmin g1000 cockpit reference guide for cessna nav iii 123 section 6 – mfd optional interfaces displaying weather data on the aux – trip planning page map nexrad and xm lightning data can be displayed on the aux - trip planning page map by pressing the nexrad and xm ltng softkeys. Figure 6-11 aux –...
Page 140
Garmin g1000 cockpit reference guide for cessna nav iii 124 section 6 – mfd optional interfaces displaying weather on the weather data link page the weather data link page displays all available weather products. The display of the weather data can ei- ther be selected by softkeys located at the bot...
Page 141
Garmin g1000 cockpit reference guide for cessna nav iii 125 section 6 – mfd optional interfaces weather data link page softkeys the following softkeys perform the gdl 69 weather functions on the weather data link page: nexrad – press the nexrad softkey to show nexrad weather and radar coverage infor...
Page 142
Garmin g1000 cockpit reference guide for cessna nav iii 126 section 6 – mfd optional interfaces echo top – press the echo top softkey to show the location, elevation, and direction the highest radar echo. This may not indicate the top of a storm or clouds, only the highest radar return echo. The inf...
Page 143
Garmin g1000 cockpit reference guide for cessna nav iii 127 section 6 – mfd optional interfaces cell mov – pressing the cell mov softkey shows the storm cells identified by the ground-based system. The movement is depicted by an arrow. The update rate is every 12 minutes. Sig/air – pressing the sig/...
Page 144
Garmin g1000 cockpit reference guide for cessna nav iii 128 section 6 – mfd optional interfaces when enabled, the following airmets can be displayed: • icing • turbulence • ifr conditions • mountain obscuration • surface winds refer to the legend for a description of the color coding. Metar – press ...
Page 145
Garmin g1000 cockpit reference guide for cessna nav iii 129 section 6 – mfd optional interfaces more wx – press the more wx softkey to display the following group of softkeys for additional weather control: note: city forecast and metar information are only displayed within the installed aviation da...
Page 146
Garmin g1000 cockpit reference guide for cessna nav iii 130 section 6 – mfd optional interfaces wind – press the wind softkey to show wind speed and direction at a selected altitude from the ground up to 42,000 feet in 3,000 foot incre- ments. The wind softkey label changes to reﬂect the winds aloft...
Page 147
Garmin g1000 cockpit reference guide for cessna nav iii 131 section 6 – mfd optional interfaces map panning information – weather data link page map panning moves the map beyond its current limits without adjusting the map range. When the panning function is selected by pushing the joystick, a panni...
Page 148
Garmin g1000 cockpit reference guide for cessna nav iii 132 section 6 – mfd optional interfaces weather product symbols figure 6-17 depicts the symbol for each weather prod- uct (read from left to right) . When a weather product is active, the product symbol is displayed in the lower right of the sc...
Page 149
Garmin g1000 cockpit reference guide for cessna nav iii 133 section 6 – mfd optional interfaces gdl 69a digital audio entertainment interface digital audio entertainment is available through the xm satellite radio service using the gdl 69a interface. Xm satellite radio allows for a variety of radio ...
Page 150
Garmin g1000 cockpit reference guide for cessna nav iii 134 section 6 – mfd optional interfaces data and audio radio id each gdl 69a contains a unique data radio id and audio radio id that allows xm to communicate with the radio. The owner must activate xm service by providing the radio id(s) to xm ...
Page 151
Garmin g1000 cockpit reference guide for cessna nav iii 135 section 6 – mfd optional interfaces xm radio page the xm radio page provides information and control of the audio entertainment features of the xm satellite ra- dio. Xm radio interface softkeys the following mfd softkeys are located below t...
Page 152
Garmin g1000 cockpit reference guide for cessna nav iii 136 section 6 – mfd optional interfaces figure 6-21 direct channel selection category the ‘category’ ﬁeld of the xm radio page displays the currently selected category of audio. Categories of chan- nels such as jazz, rock, or news, can be selec...
Page 153
Garmin g1000 cockpit reference guide for cessna nav iii 137 section 6 – mfd optional interfaces to select a preset channel number: 1. While on the radio page, press the presets softkey. 2. Press the numbered softkeys (ps1 - ps15) on the bottom of the screen to directly select the desired preset chan...
Page 154
Garmin g1000 cockpit reference guide for cessna nav iii 138 section 6 – mfd optional interfaces message description check antenna – xm radio page, the active channel is replaced with this message antenna is not connected updating – xm radio page, the active channel is replaced with this message upda...
Page 155
Garmin g1000 cockpit reference guide for cessna nav iii 139 appendix a annunciations and alerts a.1 introduction note: the aircraft flight manual takes prece- dence over any conﬂicting information found in this document. The g1000 alerting system conveys alerts to the pilot using a combination of th...
Page 156
Garmin g1000 cockpit reference guide for cessna nav iii 140 appendix a a.2 alert level definitions the g1000 alerting system, as installed in cessna nav iii aircraft, uses three alert levels. • warning: this level of alert requires immediate pilot attention. A warning alert is accompanied by an annu...
Page 157
Garmin g1000 cockpit reference guide for cessna nav iii 141 appendix a a.3 cessna nav iii aircraft alerts the following alerts are conﬁgured speciﬁcally for cessna nav iii aircraft. See the appropriate aircraft flight manual for recommended pilot actions. Voice alerts the following voice alerts can ...
Page 158
Garmin g1000 cockpit reference guide for cessna nav iii 142 appendix a a.4 g1000 system annunciations when an lru or an lru function fails, a large red ‘x’ is typically displayed on windows associated with the failed data. The following section describes various sys- tem annunciations. Refer to the ...
Page 159
Garmin g1000 cockpit reference guide for cessna nav iii 143 appendix a system annunciation comment display system is not receiving vertical speed input from the air data com- puter. Display system is not receiving valid heading input from the ahrs. The gps information is either not present or is inv...
Page 160
Garmin g1000 cockpit reference guide for cessna nav iii 144 appendix a a red ‘x’ may be the result of an lru or an lru func- tion failure. The ﬁgure presented below illustrates all pos- sible ﬂags and the responsible lrus. Figure a-5 g1000 system failure annunciations gdc 74a air data computer gtx 3...
Page 161
Garmin g1000 cockpit reference guide for cessna nav iii 145 appendix a a.5 g1000 system message advisories this section describes various g1000 system message advisories. Certain messages are issued due to an lru or an lru function failure. Such messages are normally accom- panied by a corresponding...
Page 162
Garmin g1000 cockpit reference guide for cessna nav iii 146 appendix a database message advisories alerts window message comments mfd1 db err – mfd1 aviation database error exists. The mfd and/or pfd detected a failure in the aviation database. Attempt to reload the aviation database. If problem per...
Page 163
Garmin g1000 cockpit reference guide for cessna nav iii 147 appendix a gia 63 message advisories alerts window message comments gia1 config – gia1 conﬁguration error. Conﬁg service req’d. The gia1 and/or gia2 conﬁguration settings do not match backup conﬁguration memory. The g1000 system should be s...
Page 164
Garmin g1000 cockpit reference guide for cessna nav iii 148 appendix a gia 63 message advisories (cont.) alerts window message comments com1 rmt xfr – com1 remote transfer key is stuck. The com1 and/or com2 transfer switch is stuck in the enabled (or “pressed”) posi- tion. Press the transfer switch ...
Page 165
Garmin g1000 cockpit reference guide for cessna nav iii 149 appendix a gia 63 message advisories (cont.) alerts window message comments g/s1 fail – g/s1 is inoperative. A failure has been detected in glideslope receiver 1 and/or receiver 2. The g1000 system should be serviced. G/s2 fail – g/s2 is in...
Page 166
Garmin g1000 cockpit reference guide for cessna nav iii 150 appendix a grs 77 message advisories alerts window message comments ahrs tas – ahrs not receiving airspeed. The ahrs is not receiving true airspeed from the air data computer. The ahrs relies on gps information to augment the lack of airspe...
Page 167
Garmin g1000 cockpit reference guide for cessna nav iii 151 appendix a gdc 74a message advisories alerts window message comments gdc1 config – gdc1 conﬁguration error. Conﬁg service req’d. Gdc 74a conﬁguration settings do not match those of backup conﬁguration memory. The g1000 system should be serv...
Page 168
Garmin g1000 cockpit reference guide for cessna nav iii 152 appendix a miscellaneous message advisories (cont.) alerts window message comments locked fpl – cannot navigate locked ﬂight plan. This occurs when the pilot attempts to activate a stored ﬂight plan that contains locked waypoint. Remove loc...
Page 169
Garmin g1000 cockpit reference guide for cessna nav iii 153 index a acquisition squitter 57, 59 activate 33 activate an approach procedure 99 activation required 138 active 41, 44 active channel 135 active ﬁeld 38, 39, 42, 45, 48, 55 active ﬂight plan 32, 35 active ﬂight plan page 90, 91, 92, 95, 98...
Page 170
Garmin g1000 cockpit reference guide for cessna nav iii 154 index course pointer 23 cross error 110 current track 35 cvr 72 cyclones 130 cylinder head 79, 80 cylinder head temperature 79 cyl slct softkey 80 d database 8 data link 1 dcltr softkey 14, 75, 85 default power-on settings 63 departures 96 ...
Page 171
Garmin g1000 cockpit reference guide for cessna nav iii 155 index inset map 34 inset softkey 34 instrument approach procedures 96 integ 28 intercom system (ics) 67, 68, 70, 71 interrogations 57, 58, 59 j joystick (bezel) 4 k key(s) 5, 6 clr 4 com frequency toggle 4 direct-to 4 ent 4 fpl 4 menu 4 nav...
Page 172
Garmin g1000 cockpit reference guide for cessna nav iii 156 index optional interfaces 111 outside air temperature 29 overview 1 p pa 64 panning 87 pfd 13, 14, 37, 38, 39, 42, 43, 45, 48, 56, 64, 65, 70 pfd navigation status bar 35 pilot 67, 68 pitch scale 20 pitch warning 20 play key 72 power-up pag...
Page 173
Garmin g1000 cockpit reference guide for cessna nav iii 157 index vertical deviation/glideslope indica- tor 22 vertical speed 19, 110 vertical speed indicator 22 vertical speed pointer 22 vfr code 58 vhf 37, 41 view softkey 89 voice alerts 141 vol/push id 40, 44 vol/push sq 40, 41 voltmeter 79, 81 v...
Page 174
Garmin g1000 cockpit reference guide for cessna nav iii 158 index this page intentionally left blank..
Page 175
Garmin g1000 cockpit reference guide for cessna nav iii.
Page 176
Garmin international, inc. 1200 east 151st street olathe, ks 66062, u.S.A. P: 913.397.8200 f: 913.397.8282 garmin at, inc. 2345 turner road se salem, or 97302, u.S.A. P: 503.391.3411 f: 503.364.2138 garmin (europe) ltd. Unit 5, the quadrangle abbey park industrial estate romsey, so51 9dl, u.K. P: 44...