1. DL manuals
  2. Garmin
  3. Tools
  4. Cessna Caravan G1000
  5. Pilot's Manual

Garmin Cessna Caravan G1000 Pilot's Manual

Manual is about: Integrated Flight Deck

Summary of Cessna Caravan G1000

  • Page 1

    G1000 tm multi function display pilot’s guide for cessna nav iii.

  • Page 2

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A record of revisions revision date of revision revision page range description a 12/15/04 8-1 – 8-163 initial release..

  • Page 3

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-1 introduction 8a.1 introduction this g1000 pilot’s guide describes and explains the operation of the multi function display (mfd) as installed in cessna nav iii aircraft. Description the display portion of the g1000 integrated...

  • Page 4

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-2 introduction power-up page information the power-up page displays general system information such as software version and database versions to the pilot upon power-up of the g1000 system. The power-up page displays the follow...

  • Page 5

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-3 introduction dcltr (declutter) – pressing the dcltr softkey removes map information in three levels. Chklist (checklist) – pressing the chklist softkey displays the checklist page. Electronic checklists the g1000 multi functi...

  • Page 6

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-4 introduction note: all warnings are displayed in yellow for ease of identification. Removing the checkmark from a checklist item press the clr key to remove a checkmark from an item. Advancing to the next checklist once the la...

  • Page 7

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-5 introduction figure 8a.1.3 mfd softkeys back rst used system engine lean engine map dcltr back system lean engine engine lean back system press the engine softkey on any level to return to the lean and system softkey level tr...

  • Page 8

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-6 introduction mfd page groups the mfd displays gps/navigation flight information in four main page groups: • map (map): navigation map page traffic map page terrain proximity page • waypoint (wpt) : airport information page inte...

  • Page 9

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-7 introduction working with menus much of the operation of the g1000 mfd is accomplished using a menu interface. The g1000 has a bezel-mounted dedicated menu key (menu) when pressed, displays a context-sensitive list of options...

  • Page 10

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-8 introduction this page intentionally left blank..

  • Page 11

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-9 navigation map page 8a.2 navigation map page warning: use of the navigation map page for pilotage navigation is prohibited. The navigation map is intended only to enhance situational awareness. Navigation is to be conducted u...

  • Page 12

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-10 navigation map page to select the navigation map page: 1. Turn the large fms knob to select the map page group. 2. Turn the small fms knob to select the naviga- tion map page. The page group name and page title is displayed ...

  • Page 13

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-11 navigation map page navigation map page operations the following navigation map page operations can be performed: • changing the map orientation • selecting a map range • using the auto zoom feature • identifying aviation ma...

  • Page 14

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-12 navigation map page identifying aviation map data the following aviation data is displayed on the navigation map page: airport symbols: • non-towered airports (purple in color). • towered airports (blue in color). • non-serv...

  • Page 15

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-13 navigation map page decluttering the map the navigation map page can be quickly decluttered by repeatedly pressing the dcltr softkey until the desired detail is displayed. The declutter level label is displayed above the dcl...

  • Page 16

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-14 navigation map page map panning map panning moves the map beyond its current limits without adjusting the map range. When the panning function is selected by pushing in the joystick, a panning arrow flashes on the map display...

  • Page 17

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-15 navigation map page panning arrow latitude and longitude position of pointer distance, bearing and elevation figure 8a.2.3 map panning.

  • Page 18

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-16 navigation map page displaying topographic data on the navigation map page the navigation map page displays various shades of topography land colors representing the rise and fall of land elevation similar to aviation sectio...

  • Page 19

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-17 navigation map page displaying terrain information on the navigation map page terrain data can be displayed on the navigation map page by pressing the terrain softkey. Terrain symbology (mountain icons) appear next to the ma...

  • Page 20

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-18 navigation map page mfd navigation status window the mfd navigation status window displays four, user-configurable fields which can display the following data: • bearing to next waypoint (brg) • distance to next waypoint (dis)...

  • Page 21

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-19 navigation map page orientation there are four map orientation selections: north up, track up, dtk up, and hdg up. • north up fixes the top of the map to a north head- ing. • track up adjusts the top of the map display to the...

  • Page 22

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-20 navigation map page auto zoom the automatic zoom feature automatically adjusts the map range from 2000 nm through each lower range, stopping at 1.5 nm as the aircraft approaches the destination waypoint. To enable/disable au...

  • Page 23

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-21 navigation map page track vector the navigation map page can display a track vector as a dashed cyan line segment with an arrowhead attached to the end, extended to a predicted location in 60 seconds along the current aircra...

  • Page 24

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-22 navigation map page nav range ring the nav range ring shows the direction of travel (ground track) on a rotating compass card. The range of the nav compass is determined by the map range, 125 feet (500 feet map range) to 500...

  • Page 25

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-23 navigation map page topo range the topo range setting enables or disables the topography range box located in the lower right corner of the navigation map page. To enable/disable the topo range box: 1. With the navigation ma...

  • Page 26

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-24 navigation map page obstacle data obstacle data can be enabled or disabled on the navigation map page using the ‘obstacle data’ setting. A data range can also be selected. The data range is the maximum map range that terrain...

  • Page 27

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-25 navigation map page traffic group the display of traffic information on the navigation map page closely resembles tcas display symbology. Traffic is only displayed on the navigation map page if aircraft heading data is availabl...

  • Page 28

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-26 navigation map page to select a traffic mode: 1. With the navigation map page displayed, press the menu key to display the navigation map page menu. The cursor flashes on the ‘map setup’ option. 2. Press the ent key. The map s...

  • Page 29

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-27 navigation map page the traffic label displays the altitude separation above or below the symbol and the vertical speed sense arrow to the right of the symbol. To select a traffic label zoom range: 1. With the navigation map p...

  • Page 30

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-28 navigation map page aviation group options • active flight plan (active fpl)- the active flight plan zoom range sets the maximum range at which the active flight plan magenta line is displayed on the display (off - 2000 nm). •...

  • Page 31

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-29 navigation map page to select an aviation group item range: 1. With the navigation map page displayed, press the menu key to display the navigation map page menu. The cursor flashes on the ‘map setup’ option. 2. Press the ent...

  • Page 32

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-30 navigation map page land group options • latitude/longitude (lat/lon) - the lat/lon label size sets the size at which latitude/longitude labels appear on the display (none, small, medium, and large). The zoom range sets the ...

  • Page 33

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-31 navigation map page to select a land group item range: 1. With the navigation map page displayed, press the menu key to display the navigation map page menu. The cursor flashes on the ‘map setup’ option. 2. Press the ent key....

  • Page 34

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-32 navigation map page reference pointer bearing, distance, and elevation information pointer latitude and longitude figure 8a.2.11 measuring bearing and distance.

  • Page 35

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-33 traffic map page 8a.3 traffic map page the traffic map page is the second page in the map group and displays the following information: • current aircraft location, surrounding traffic information system (tis) traffic, and rang...

  • Page 36

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-34 traffic map page tis symbology tis traffic is displayed on the traffic map page according to tcas symbology. A traffic advisory (ta) symbol is displayed as a solid yellow circle (or half circle on the outer range ring if the tr...

  • Page 37

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-35 traffic map page operating mode once the aircraft is airborne (determined by system configuration at the time of installation) the system switches from standby mode to operating mode. The g1000 displays ‘operate’ in the upper...

  • Page 38

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-36 traffic map page tis traffic status the mfd indicates the following tis traffic status to the pilot. Traffic banner • age - if traffic data is not refreshed within 6 seconds, an age indicator (i.E., ‘age 00:06’) is displayed in ...

  • Page 39

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-37 terrain proximity page 8a.4 terrain proximity page caution: use of terrain proximity informa- tion for primary terrain avoidance is prohibited. The terrain proximity map is intended only to enhance situational awareness. It ...

  • Page 40

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-38 terrain proximity page terrain proximity page operations there are two terrain/obstacle viewing options available (relative to the position of the aircraft), a radar-like arc (120°) display and a 360° default display. To cha...

  • Page 41

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-39 terrain proximity page displaying obstacle data the terrain proximity page displays obstacle data with heights greater than 200 feet above ground level (agl) located at their geographical position loca- tion throughout the w...

  • Page 42

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-40 terrain proximity page this page intentionally left blank..

  • Page 43

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-41 direct-to navigation 8a.5 direct-to navigation the “direct-to” function provides a quick method of setting a course to a destination waypoint. Once a direct-to is activated, the g1000 establishes a point-to- point course lin...

  • Page 44

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-42 direct-to navigation direct-to navigation operations selecting a direct-to waypoint in addition to selecting a direct-to waypoint using an identifier, a direct-to waypoint can be selected in the following ways: • by facility ...

  • Page 45

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-43 direct-to navigation selecting a direct-to destination from the active flight plan any waypoint contained in the flight plan may be selected as a direct-to destination from the direct-to waypoint page when navigating an activ...

  • Page 46

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-44 direct-to navigation selecting the nearest airport as a direct-to destination the direct-to page always displays the nearest airports (from the present position) on the nrst field. To select a nearby airport as a direct-to de...

  • Page 47

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-45 direct-to navigation canceling direct-to navigation once a direct-to is activated, the g1000 provides navigation guidance to the selected destination until the direct-to is either replaced with a new direct-to or flight plan,...

  • Page 48

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-46 direct-to navigation this page intentionally left blank..

  • Page 49

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-47 flight plans 8a.6 flight plans the g1000 can create up to 99 different flight plans with up to 31 waypoints in each flight plan. The flight plan (fpl) page group consists of three pages: • active flight plan • flight plan catal...

  • Page 50

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-48 flight plans active flight plan page options the following options are available for the flight plan page: • activate leg • store flight plan • invert flight plan • delete flight plan • load departure • load arrival • load a...

  • Page 51

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-49 flight plans to edit a flight plan: 1. Press the fpl key and turn the small fms knob to display the flight plan catalog page. 2. Press the fms knob to activate the cursor. 3. Turn the large fms knob to highlight the desired fl...

  • Page 52

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-50 flight plans store flight plan whenever an approach, departure or arrival is loaded into the active flight plan, a set of approach, departure or arrival waypoints is inserted into the flight plan along with a header line descr...

  • Page 53

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-51 flight plans invert flight plan ‘invert fight plan’ reverses the active flight plan. After traveling along a flight plan, the route can be reversed for navigation guidance back to the original departure point. To invert and (a...

  • Page 54

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-52 flight plans load a departure ‘load departure’ allows a published departure procedure for the departure airport to be loaded into a flight plan. It also replaces the current departure with a new selection. When using a direct...

  • Page 55

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-53 flight plans load an arrival ‘load arrival’ allows a published standard terminal arrival route (star) for the destination airport to be loaded into a flight plan. It also replaces the current arrival with a new selection. An ...

  • Page 56

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-54 flight plans load an approach ‘load approach’ allows for the selection of a published instrument approach for the destination airport. It also replaces the current approach with a new selection. In many cases, it is more con...

  • Page 57

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-55 flight plans remove a departure, arrival, or approach • ‘remove departure’ deletes the current dp from the active flight plan. • ‘remove arrival’ deletes the current star from the active flight plan. • ‘remove approach’ delete...

  • Page 58

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-56 flight plans change fields ‘change fields’ allows for the default fields of dtk (distance) and dis (distance) to be changed to one of the following: • cum (cumulative distance) • dis (distance) • dtk (desired track) • esa (es...

  • Page 59

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-57 flight plans flight plan catalog page the flight plan catalog page is the second flight planning page and provides flight planning information and editing capability. Once a direct-to or flight plan has been activated, the acti...

  • Page 60

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-58 flight plans activate a flight plan once a flight plan is defined using the flight plan catalog page it can be activated for navigation. Activating the flight plan overwrites any previous information at that location. To activa...

  • Page 61

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-59 flight plans invert and activate a flight plan ‘invert & activate fpl’ allows the active flight plan to be inverted and activated for navigation. To invert and activate a flight plan: 1. Press the fpl key and turn the small fm...

  • Page 62

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-60 flight plans copy a flight plan ‘copy flight plan’ copies the active flight plan to a flight plan catalog location. The copy function is useful for duplicating the active flight plan before making changes. To copy a flight plan...

  • Page 63

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-61 flight plans delete all flight plans ‘delete all’ removes all flight plans from memory at one time. To delete all flight plans: 1. From the flight plan catalog page, press the menu key to display the flight plan catalog page o...

  • Page 64

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-62 flight plans point-n-shoot flight plan creation feature the “point-n-shoot” flight plan creation feature is acti- vated using the navigation map page and the active flight plan page. To create a point-n-shoot flight plan: 1. P...

  • Page 65

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-63 flight plans vertical navigation (vnav) page the vertical navigation page allows the creation of a three-dimensional profile which guides the aircraft from it’s present position and altitude to a final (target) altitude at a s...

  • Page 66

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-64 flight plans 3. With the ‘target altitude’ field highlighted, turn the small and large fms knobs to select the target altitude and press the ent key. 4. Turn the small fms knob to select ‘above wpt’ (agl) or ‘msl’, and press ...

  • Page 67

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-65 procedures 8a.7 procedures arrivals and departures based upon the active flight plan or direct-to destination, the procedures page provides direct access to approaches, departures and arrivals. In either case, the departure a...

  • Page 68

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-66 procedures approaches the g1000 allows you to fly non-precision and precision approaches to airports with published instrument approach procedures. All available approaches are part of the jeppesen database stored internally ...

  • Page 69

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-67 procedures selecting approaches in order to select an approach, there must be an active flight plan or direct-to which terminates at an airport with a published approach. To select an approach: 1. Press the proc key to displa...

  • Page 70

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-68 procedures not all approaches in the database are approved for gps use. As you select an approach, a ‘gps’ designation to the right of the procedure name indicates the procedure can be flown using the gps receiver. Some proce...

  • Page 71

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-69 procedures gps approach examples no procedure turn an approach where there is typically no procedure turn required to get established on the inbound course to the faf is the first example. We use gps rwy 12 at kprc to show ho...

  • Page 72

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-70 procedures figure 8a.7.5 approach with no procedure turn repr oduced with permission of j eppesen sander son, inc . Not to be used for navigation..

  • Page 73

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-71 procedures flying the missed approach as you pass the map, if the runway isn’t in view, a missed approach must be performed. The g1000 continues to give guidance along an extension of the final course segment (faf to map) unt...

  • Page 74

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-72 procedures figure 8a.7.6 flying the missed approach repr oduced with permission of j eppesen sander son, inc . Not to be used for navigation..

  • Page 75

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-73 procedures flying the procedure turn the procedure turn portion of the approach is stored as one of the legs of the approach. For this reason the g1000 requires no special operations from the pilot (oth- er than flying the pr...

  • Page 76

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-74 procedures 14. As you approach the map, the waypoint mes- sage ‘arriving at waypoint’ is displayed. 15. As you cross the map, ‘susp’ is displayed in the hsi and directly above the susp softkey, indicating that automatic sequ...

  • Page 77

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-75 procedures flying the dme arc the gps overlay for a dme arc approach uses additional jeppesen provided waypoints to define the arc. When cleared for a dme arc approach, you may do either of the following to intercept the arc:...

  • Page 78

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-76 procedures figure 8a.7.8 flying the dme arc and vectors to the dme arc repr oduced with permission of j eppesen sander son, inc . Not to be used for navigation..

  • Page 79

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-77 procedures vectors to the dme arc in this example you are enroute from ksaf to kfmn on a heading of 294°, 25 miles out and atc is giving you vectors to intercept the arc outbound from hidox. 1. If you haven’t already activat...

  • Page 80

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-78 procedures accomplishing a holding pattern this example is based upon a missed approach from ksop (moore county, nc). Now you’ve decided to divert to kigx (chapel hill, nc) instead. You select the rnav (gps) rwy 9 approach i...

  • Page 81

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-79 procedures 16. As you cross the map, ‘susp’ is displayed in the hsi and directly above the susp softkey, indicating that automatic sequencing of approach waypoints is suspended at the map. A ‘from’ indication is displayed on...

  • Page 82

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-80 procedures flying a course from fix to distance, or course from fix to dme distance certain approach, departure and arrival procedures in the jeppesen database contain course from fix flight plan legs. The g1000 is able to loa...

  • Page 83

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-81 procedures 12. As you cross the map, ‘susp’ is displayed above the susp softkey, indicating that auto- matic sequencing of approach waypoints is suspended at the map. Course guidance along the final approach course continues....

  • Page 84

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-82 procedures flying a course from fix to altitude ‘course from fix to altitude’ legs shows the specific target altitude on the active flight plan. This example is based upon a flight from ksmo (santa monica munici- pal) to kpmd (p...

  • Page 85

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-83 procedures figure 8a.7.11 flying a course from fix to altitude repr oduced with permission of j eppesen sander son, inc . Not to be used for navigation..

  • Page 86

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-84 procedures flying a course from fix to manual sequence ‘course from fix to manual sequence’ legs are displayed on the active flight plan page and the navigation map page with “man seq” in place of a waypoint identifier. An exa...

  • Page 87

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-85 procedures figure 8a.7.12 flying a course from fix to manual sequence repr oduced with permission of j eppesen sander son, inc . Not to be used for navigation..

  • Page 88

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-86 procedures flying the ils approach note: when an ils approach is loaded, the ils frequency is automatically placed in the nav frequency window. Please, see vhf nav/com pilot’s guide for details. Precision approaches can be p...

  • Page 89

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-87 procedures 5. As you approach the iaf (gatto), the waypoint message ‘next dtk 272°’ is displayed in the navigation status bar on the pfd. As the distance to the iaf approaches zero, the mes- sage is replaced by a turn adviso...

  • Page 90

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-88 procedures figure 8a.7.13 flying the ils approach repr oduced with permission of j eppesen sander son, inc . Not to be used for navigation..

  • Page 91

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-89 procedures flying the vectors approach in some cases atc tells you to expect vectors onto the final approach course instead of flying the full approach. The two options below can be used to select “vectors to final”: • when the...

  • Page 92

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-90 procedures 13. As you approach the map, a waypoint message ‘arriving at waypoint’ appears. 14. As you cross the map, ‘susp’ appears above the susp softkey, indicating that automatic sequencing of approach waypoints is sus- p...

  • Page 93

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-91 waypoint page group 8a.8 waypoint page group the waypoint page group (wpt) provides informa- tion for the thousands of airports, vors, ndbs, intersec- tions, runways, frequencies and procedures stored on the sd card. In addi...

  • Page 94

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-92 waypoint page group airport information page (info) the airport information page shows the following detailed information for the selected airport: • airport information • runways • frequencies airport information page opera...

  • Page 95

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-93 waypoint page group location field facility field figure 8a.8.2 waypoint facility or city location to select a facility name or city location, where duplicate entries exist: 1. Select the desired facility name or location. 2...

  • Page 96

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-94 waypoint page group airport runway information field the airport runway information field displays runway designations, length, surface type and lighting for the selected airport. A map image of the runway layout and surround...

  • Page 97

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-95 waypoint page group airport frequency information field the airport frequency information field displays radio frequencies and frequency types for the selected airport, as well as sector and altitude restrictions (where appl...

  • Page 98

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-96 waypoint page group airport frequency descriptions the airport frequency information field uses the following descriptions and abbreviations: • frequency — communication frequencies which may include restrictions: • approach ...

  • Page 99

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-97 waypoint page group departure information page (dp) the departure information page shows the available departure procedures (dps; also referred to as sids) for the selected airport. Where multiple runways or transitions are ...

  • Page 100

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-98 waypoint page group arrival information page (star) the arrival information page shows the available standard terminal arrival (star) procedures for the selected airport. Where multiple transitions or runways are associated ...

  • Page 101

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-99 waypoint page group an arrival can be loaded from the arrival information page. To load an arrival procedure from the arrival information page: 1. Select the desired arrival, transition and runway using the steps described p...

  • Page 102

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-100 waypoint page group approach information page the approach information page shows the available approach procedures for a selected airport. Where multiple initial approach fixes (iafs) and feeder routes are available, that i...

  • Page 103

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-101 waypoint page group an approach can be loaded from the airport informa- tion page. To load an approach from the airport approach information page: 1. Select the desired approach and transition. 2. Press menu to display the ...

  • Page 104

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-102 waypoint page group intersection information page the intersection information page displays the following information for a selected intersection: • map of surrounding area • intersection identifier and symbol • name • gene...

  • Page 105

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-103 waypoint page group intersection information page operations to change the map range, turn the joystick to the left to select a lower range, turn it to the right to select a higher range. Note: intersections can only be sel...

  • Page 106

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-104 waypoint page group ndb information page the ndb information page displays the following information for a selected non-directional beacon: • map of surrounding area • ndb identifier and symbol • name • closest city • genera...

  • Page 107

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-105 waypoint page group ndb information page operations the ndb information page allows the following operations: • ndb selection by identifier • ndb selection by name • ndb selection by closest city to change the map range, tur...

  • Page 108

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-106 waypoint page group ndb information page options the following ndb information page options are available by pressing the menu key (with the ndb information page displayed): • ‘view recent ndb list’ which allows you to view...

  • Page 109

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-107 waypoint page group vor information page the vor information page displays the following in- formation for a selected vor: • map of surrounding area • identifier and symbol • name • closest city • general location • latitude...

  • Page 110

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-108 waypoint page group vor information page operations the vor information page allows the following operations: • vor selection by identifier • vor selection by name • vor selection by closest city the map range is adjustable ...

  • Page 111

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-109 waypoint page group vor information page options the following vor information page options are available by pressing the menu key (with the vor information page displayed): • ‘view recent vor list’ which allows you to view...

  • Page 112

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-110 waypoint page group user waypoint information page the g1000 allows the storage of up to 1,000 user- defined waypoints. The user waypoint information page displays the waypoint name (up to six characters long), identifier and...

  • Page 113

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-111 waypoint page group the following data is displayed on the user waypoint information page: • map of surrounding area • identifier • comment • general location • latitude/longitude • a reference waypoint with identifier, radia...

  • Page 114

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-112 waypoint page group creating user waypoints user waypoints may be created from the user waypoint information page or the navigation map page. To create a new user waypoint from the user waypoint information page, enter its ...

  • Page 115

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-113 waypoint page group creating user waypoints from the navigation map page the navigation map page and panning target pointer provide a quick means of saving your present position as a user-defined waypoint. To capture and sav...

  • Page 116

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-114 waypoint page group modifying user waypoints to modify an existing waypoint, select that waypoint on the user waypoint information page and enter the new position information directly over the old information. To modify a u...

  • Page 117

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-115 waypoint page group user waypoint information page options the following user waypoint information page options are available by pressing the menu key (with the user waypoint information page displayed): • delete all user w...

  • Page 118

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-116 waypoint page group use ‘present position’ when selected will move the currently selected user waypoint to the present position of the aircraft. Note: the user waypoint is set to the airplane’s position at the time when thi...

  • Page 119

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-117 waypoint page group create new waypoint allows the pilot to create a new user waypoint. To create a new waypoint: 1. From the user waypoint information page, press the menu key to display the user waypoint information page ...

  • Page 120

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-118 waypoint page group this page intentionally left blank..

  • Page 121

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-119 auxiliary page group 8a.9 auxiliary page group the auxiliary page group (aux) provides detailed trip planning information, satellite status, raim prediction, system settings, lru status and database information. The aux gro...

  • Page 122

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-120 auxiliary page group trip planning page the trip planning page calculates trip statistics, fuel statistics, and other statistics for a specified direct-to, point-to-point, or flight plan based on automatic or man- ual input o...

  • Page 123

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-121 auxiliary page group trip planning trip planning allows you to view desired track (dtk), distance (dis), estimated time enroute (ete), estimated time of arrival (eta), and enroute safe altitude (esa) for a direct-to, point-...

  • Page 124

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-122 auxiliary page group fuel planning using fuel flow (ff) and/or fuel totalizer data, the aux trip planning page displays current fuel conditions along the active direct-to or flight plan. You may also manually enter fuel flow, ...

  • Page 125

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-123 auxiliary page group other statistics to calculate density altitude and true air- speed 1. Select ‘manual’ page mode by pressing the manual softkey. 2. Turn the large fms knob to select the ‘ind altitude’ field. Turn the sma...

  • Page 126

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-124 auxiliary page group utility page the utility page displays timers, trip statistics, and scheduler information for flight planning purposes. Figure 8a.9.3 utility page figure 8a.9.4 utility page menu.

  • Page 127

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-125 auxiliary page group utility page operations to set the generic timer direction (up, down): 1. Select the aux utility page. 2. Press the fms knob. The ‘generic’ timer field is highlighted. 3. Turn the small fms knob to displ...

  • Page 128

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-126 auxiliary page group trip statistics to reset trip statistics readouts: 1. Press the menu key to display an options window with the following reset options: • reset trip odom/avg gs – resets trip aver- age ground speed read...

  • Page 129

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-127 auxiliary page group gps status page the gps status page provides a visual reference of gps receiver functions: gps satellite constilation gps satellite status figure 8a.9.5 gps status page figure 8a.9.6 gps status page men...

  • Page 130

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-128 auxiliary page group satellite status page • satellite constellation displaying the following for each satellite being tracked: azimuth elevation prn number tracking status • a receiver tracking status display that displays...

  • Page 131

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-129 auxiliary page group the satellite status page also indicates the accuracy of the position fix, using estimated position error (epe) and dilution of precision (dop) figures. Dop measures satellite geometry quality (i.E., numb...

  • Page 132

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-130 auxiliary page group raim prediction “raim” is an acronym for receiver autonomous integrity monitoring, a gps receiver function that performs a consistency check on all tracked satellites. Raim ensures that the available sa...

  • Page 133

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-131 auxiliary page group figure 8a.9.7 raim.

  • Page 134

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-132 auxiliary page group gps signal strength the satellite status page can be helpful in troubleshooting weak (or missing) signal levels due to poor satellite coverage or installation problems. Refer to this page occasionally t...

  • Page 135

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-133 auxiliary page group system setup page the system setup page is the fourth aux page and provides access (via a list of menu options) to manage the following system parameters: • local or utc time display • units of measure ...

  • Page 136

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-134 auxiliary page group pilot profiles the pilot profile section of the system setup page al- lows the pilot to select, create, delete, and rename up to a total of 25 profiles. Profiles can be created based on garmin factory defau...

  • Page 137

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-135 auxiliary page group deleting a profile to delete a profile: 1. Select the system setup page. 2. Press the fms knob momentarily, to activate the flashing cursor. 3. Turn the large fms knob to highlight the delete field in the p...

  • Page 138

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-136 auxiliary page group date/time the date/time box provides settings for time format (local or utc; 12- or 24-hour) and time offset. The time offset is used to define current local time. Utc (also called “gmt” or “zulu”) date ...

  • Page 139

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-137 auxiliary page group the display units section of the system setup page allows the following operations: • to select a nav angle (auto, true) • to select distance and speed units (metric or nautical) • to select altitude an...

  • Page 140

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-138 auxiliary page group airspace alerts the airspace alerts fields allow the pilot to turn the controlled/special-use airspace message alerts on or off. This does not affect the alerts listed on the nearest airspaces page or th...

  • Page 141

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-139 auxiliary page group to turn an airspace alert on or off: 1. Select the system setup page. 2. Press the fms knob momentarily, to activate the flashing cursor. 3. Turn the large fms knob to highlight the desired ‘airspace ale...

  • Page 142

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-140 auxiliary page group arrival alerts an arrival alert, provided on the system setup page, can be set to notify you with a message when you have reached a user-defined distance to the final destination (the direct-to waypoint o...

  • Page 143

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-141 auxiliary page group audio alerts the audio alert section of the system setup page gives you the option of selecting a male or female voice for au- dio alerts. To change the audio alert voice: 1. Select the system setup pag...

  • Page 144

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-142 auxiliary page group gps cdi the cdi section of the system setup page allows you to define the range for the on-screen course deviation indicator. The range values represent full range deflection for the cdi to either side. T...

  • Page 145

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-143 auxiliary page group to change com channel spacing: 1. Select the system setup page. 2. Press the fms knob momentarily, to activate the flashing cursor. 3. Turn the large fms knob to highlight the ‘channel spacing’ field. 4. ...

  • Page 146

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-144 auxiliary page group system status page the system status page displays the status and soft- ware version numbers for all detected system lrus. Pertinent information of all databases in the system is also displayed. Active ...

  • Page 147

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-145 nearest page group 8a.10 nearest page group the nearest (nrst) page group is the fourth page group which consists of the following pages: • nearest airports • nearest intersections • nearest ndb • nearest vor • nearest user...

  • Page 148

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-146 nearest page group navigating to a nearest waypoint the nrst pages can be used in conjunction with the direct-to function to quickly set a course to a nearby facility. This feature can be a real time saver compared to retri...

  • Page 149

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-147 nearest page group figure 8a.10.2 direct-to from nearest airports page.

  • Page 150

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-148 nearest page group nearest airports page the nearest airports page displays the following information for a selected airport: • map of surrounding area • airport identifier, symbol, bearing, distance (up to 25 airports withi...

  • Page 151

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-149 nearest page group the nearest airports page can be used to quickly tune the com transceiver to a nearby airport. The selected frequency is placed in the standby field of the com window and activated using the com frequency ...

  • Page 152

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-150 nearest page group figure 8a.10.5 nearest airports page.

  • Page 153

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-151 nearest page group nearest intersections page the nearest intersections page displays the following information for a selected intersection: • map of surrounding area • intersection identifier, symbol, bearing, distance (wit...

  • Page 154

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-152 nearest page group to select the nearest intersections page: 1. From any page, press and hold the clr key to select the navigation map page. 2. Turn the large fms knob to select the nrst page group. ‘nrst’ is displayed in t...

  • Page 155

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-153 nearest page group nearest ndb page the nearest ndb page displays the following information for a selected ndb: • map of surrounding area • ndb identifier, symbol, bearing, distance (within 200 nm of current position) • ndb ...

  • Page 156

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-154 nearest page group to select the nearest ndb page: 1. From any page, press and hold the clr key to select the navigation map page. 2. Turn the large fms knob to select the nrst page group. ‘nrst’ is displayed in the page gr...

  • Page 157

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-155 nearest page group nearest vor page the vor information page displays the following information for a selected vor: • map of surrounding area • identifier, symbol, bearing, distance • name • closest city • vor type • latitud...

  • Page 158

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-156 nearest page group to select the nearest vor page: 1. From any page, press and hold the clr key to select the navigation map page. 2. Turn the large fms knob to select the nrst page group. ‘nrst’ is displayed in the page gr...

  • Page 159

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-157 nearest page group nearest user waypoint page the nearest user waypoint page displays the following information for a selected user waypoint: • map of surrounding area • identifier • symbol • bearing and distance • latitude/...

  • Page 160

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-158 nearest page group to select the nearest user waypoint page: 1. From any page, press and hold the clr key to select the navigation map page. 2. Turn the large fms knob to select the nrst page group. ‘nrst’ is displayed in t...

  • Page 161

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-159 nearest page group nearest frequencies page the nearest frequencies page displays the facility name, bearing to and distance to the five nearest artcc and fss points of communication (within 200 nautical miles of the present...

  • Page 162

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-160 nearest page group to select the nearest frequencies page: 1. From any page, press and hold the clr key to select the navigation map page. 2. Turn the large fms knob to select the nrst page group. Nrst is displayed in the p...

  • Page 163

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-161 nearest page group nearest airspaces page the nearest airspaces page displays the following information for a maximum of 20 controlled or special use airspaces: • map of surrounding area • airspace alerts box displaying air...

  • Page 164

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-162 nearest page group airspace alerts box the airspace alerts box displays the airspace name, status, and time to entry. The status and time to entry (if applicable) is based on the following conditions: • if the projected cou...

  • Page 165

    Garmin g1000 mfd pilot’s guide for cessna nav iii 190-00392-02 rev. A 8a-163 nearest page group airspaces the nearest airspaces page displays – and airspace messages are provided for the following airspace types: • alert • caution • class b • class c • tca • danger • moa • prohibited • restricted • ...

  • Page 166

    Garmin international, inc. 1200 east 151st street olathe, ks 66062, u.S.A. P: 913.397.8200 f: 913.397.8282 garmin at, inc. 2345 turner road se salem, or 97302, u.S.A. P: 503.391.3411 f: 503.364.2138 garmin (europe) ltd. Unit 5, the quadrangle abbey park industrial estate romsey, so51 9dl, u.K. P: 44...