Hollis Explorer User Manual - page 12
4 |
Mechanical Features
The EXPLORER is an electro-mechanical rebreather. Over time certain
software, hardware, optional extras, and/or software upgrades will become
available. Please check www.HollisGear.com for details.
HARNESS/BCD
EXPLORER uses a custom bolt fitting, backplate, Solo webbing harness,
and Hollis C45LX Wing. There is an optional EXPLORER BCD available.
COUNTERLUNG
The EXPLORER comes complete with dual back-mounted counterlungs
(BMCL). These are attached to the canister by a screw threaded O-ring
fitting.
CYLINDER
EXPLORER uses a 5L/40cuft cylinder with a nitrox compatible inline valve.
Dives over 18 m/60 ft requires that an additional bailout cylinder of a
minimum capacity of 3 L/20 cuft be used in conjunction with the 5L/40 cuft
cylinder.
!
NOTE: All calculations presented in this manual assume the use of
a 5 L/40 cuft cylinder.
USA Only Cylinder Options Chart
Capacity
Working pressure
Manufacturer
WC (L)
WC (CU/FT)
BAR
PSI
Any brand that is
prepped for nitrox use.
Typical sizes and pres-
sures are shown.
5
41
232
3410
4.9
40
204
3000
4.3
35.26
204
3000
5
41
232
3410
6
49
232
3410
!
NOTE: The Explorer can accomadate a maximum 14 cm/5.5 in
diameter tank.