Hollis Explorer User Manual - page 59
| 51
There are 3 main warning levels associated with the HUD, BUD, and
on-screen displays.
Alarm Code
Meaning
Correct Action
Solid Green
This code means there
are no detected prob-
lems.
OK - Procede with dive
as planned.
Flashing Green & Blue
(HUD/BUD)
&
Yellow
(wrist display)
Warning - It is activat-
ed when a manage-
able error situation is
in place.
The correct response
will be displayed on
the STATUS screen
and will often tell the
diver to ascend slowly
on closed circuit
monitoring the wrist
display.
Magenta (wrist display
only)
Loss of communica-
tion between sensors
or modules. It is
usually associated with
DO NOT dive or OC
bailout but could just
be a warning.
Check the status
message on the wrist
display an act accord-
ingly.
Flashing Red
& Vibrating
It is activated when
there is an urgent
issue.
- DO NOT start the
dive.
- If already diving, the
diver should switch
to the bailout gas and
ascend.
!
NOTE: Red alarms take priority in the HUD over Green/Blue
alarms.
!
NOTE: Yellow on the wrist display is equivalent to the alternating
blue/green state of the HUD.
!
NOTE: The HUD vibration alarm will vibrate every second for 5
seconds, then repeat the 5 second alarm every 30 seconds, or if
the source of the alarm changes.
3
.1
5