Hollis Explorer User Manual - page 97
| 89
Skill
Number
Skill
Learning
Requirement
Purpose
Details
5
Dive Control
Parameter
Adjustment
Use the Manual and
Auto DCP settings
on the primary con-
troller.
To fully under-
stand the function,
adjustment of the
DCP, and how dif-
ferent settings effect
no-stop times and
endurance.
Using the wrist
display, adjust the
DCP with both the
manual and auto-
matic settings.
6
Remove and
replace unit on
surface
User demonstrates
comfort remov-
ing and replacing
equipment.
To ensure a diver
is comfortable in
the equipment,
can remove it in an
emergency, and im-
prove abillity to dive
equipment from a
small vessel.
This skill is to
be completed at
the surface, with
weights removed,
and BCD inflated.
7
Electronics
operation
User demonstrates
competency and
understanding of
the use of the elec-
tronics.
To ensure the diver
understands all
functions with a fo-
cus on the STATUS
system.
On the surface and
in the water the div-
er should be able
to demonstrate
navigation through
all the STATUS
screens, describe
(onsurface) each
screen's meaning,
and comfortably in-
terpret all displayed
information.
8
SMB deployment
User demonstrates
deployment of
an SMB followed
by a safe ascent,
stopping at 6 m/ 20
ft, while using the
EXPLORER.
To ensure the diver
can maintain buoy-
ancy and monitor
displays, while
tasked with SMB
deployment.
This skill teaches
students the rela-
tionship between
PO
2
changes due to
ascent and buoy-
ancy changes.
6.
2