Kathrein MSK 130 Instructions For Use Manual - page 27
27 of 100
⑤
GRAPHICS
COLOUR
colour scheme of the user interface; set to
BLUE
by default
GREY
/
BLUE
/
GREEN
/
BROWN
⑥
DISP. LIGHT
(Display bright-
ness)
max. display brightness; set to
FULL ON
by default
When set to other settings,the display back light decreases
automatically after 15/30/60 seconds of inactivity for battery
saving.
FULL ON
/
15 SEC
/
30 SEC
/
60 SEC
⑦
BATTERY TEST
result of the last battery test
ON
/
255BEEY
(example)
The number (here –
255
) indicates the battery life in minutes.
The letters
BEE
represent a checksum and have no meaning for
the evaluation of the battery test results.
The last letter is either
Y
or
N
.
Y
stands for "Yes" and means that
the battery is in working order.
N
stands for "No" and means
that the battery is faulty or that the battery test has been
interrupted.
⑧
TOUCH-
SCREEN
determines whether the operation via the touch screen is ena-
bled or disabled
ENABLE
/
DISABLE
⑨
CALIBRATE
TOUCH-
SCREEN
Touch screen calibration function
1. Tap
CALIBRATE TOUCHSCREEN
or press the navigation
wheel.
➯ A black screen with an operating instruction and the
cursor in the top left-hand corner appears:
2. Tap the cursor.
➯ A second black screen with an operating instruction and
the cursor in the top right-hand corner appears:
3. Repeat Step 2 twice. Pay attention to the cursor position.
➯ At the end of calibration, a black screen with the mes-
sage
CALIBRATION COMPLETE!
appears.