Kathrein MSK 130 Instructions For Use Manual - 21.1
Remote Controlling the Meter (Optional)
84 of 100
21
Remote Controlling the Meter (Optional)
Using the remote control function it is possible to control all measurement functions over
a network connection. Only a web browser is necessary to recall and control DVB-T/-S
and -C signals as well as ration and analogue TV signals. The remote control can be car-
ried out from a smart phone, tablet, PC or a laptop.
21.1
Activating the Remote Controlling of the Meter
1. Open a web browser.
2. In the address bar of the web browser, enter the IP address of the meter/index.html,
e.g.
192.168.2.200/index.html
Tip
See the LAN configuration for the signal meter IP address; see LAN CON-
FIGURATION, p. 29.
➯ The following information about the meter and the login form appear:
3. For
Username
, enter the meter type as follows:
_MSK 130_
4. For
Password
, enter the meter’s serial number. It is shown in the meter information
under
Serial Number
.
5. Press the
Login
button or enter to log in.