Kathrein MSK 130 Instructions For Use Manual - 21.3
of
100
Remote Controlling the Meter (Optional)
86 of 100
21.3
Deactivating the Remote Control
To turn off the meter remote control:
1. Pull out the LAN cable out of the meter.
2. Press the
SPECT
button for 4 seconds.
➯ The remote control is deactivated. It is possible to operate the meter using the but-
tons, navigation wheel and the touch screen.
21.4
Changing Settings
1. Enter a parameter or select it from the drop-down menu.
2. Press
APPLY
to apply the changes.
21.5
Defining Measurement and Logger Settings
21.5.1
Entering Measurement Settings
1. Under
Settings
▶
Monitor
, enter the settings for the single channel measurements
depending on the modulation; see also Measuring SAT, TV, CATV and Optical Signals,
p. 41:
2. Press
APPLY
to apply the changes.