Kathrein MSK 130 Instructions For Use Manual - 21.8.2
of
100
Remote Controlling the Meter (Optional)
90 of 100
21.8.2
Performing IPTV Analysis
1. Click on
Monitor
▶
TS Analyzer
(
①).
2. Select an input at
Input
(
②).
➯ The following image appears:
1
2
3
5
4
3. At
③, enter the IP parameters of the IP data stream to be measured; see also IPTV
Configuration (only MSK 130/IA and MSK 130/OIA), p. 37.
For a unicast transmission:
a. At
IGMP Version
④, select the
V3
setting.
➯ It is possible to set the unicast address. To do so:
b. At
Enable Source
(
⑥), select the
Yes
setting and enter the unicast address at
IP
Source
(
⑦):
6
7