Kathrein MSK 130 Instructions For Use Manual - Mpeg Services
MPEG Services
60 of 100
17
MPEG Services
17.1
Decoding the Signal Content
► Touch
SERVICE
(MPEG services list) in the main menu.
➯ The MPEG decoder is activated. The meter saves the last measurement carried out
by the user. This means that the MPEG decoder tunes on the last measured chan-
nel (SAT, TER or CATV).
➯ The MPEG services list function allows the user to decode the signal transport
stream and to visualise the list of included services:
1
2
3
4
5
6
7
①
Channel tuning
parameters
The essential tuning parameters, such as frequency, channel
bandwidth and modulation standard are displayed.
②
Services list
Once the signal is locked and demodulated, the decoder
starts scanning the transport stream to find service informa-
tion tables, containing all the information related to the trans-
port stream structure: number of services, list of PIDs, service
names, etc. When all this information is available, the meter
visualises the list of all the available services and displays
the service type for each of them (
TV
,
RADIO
or
DATA
), the
encryption status (
ENC
,
N
= not encrypted or
Y
= encrypted)
also the LCN for TV services.
③
DATE
VIDEO RATE
(Date and video bit
rate)
The current date (day/month/year) and the video bit rate of
the decoded service are displayed.