Kathrein MSK 130 Instructions For Use Manual - page 31
of
100
31 of 100
③
DISCOVERY
selects the mode for the automatic scan
TERR. ONLY
scans only terrestrial channels (DVB-T/T2)
TERR &
CABLE
Scans for terrestrial and cable channels
(DVB-T/T2 and DVB-C)
④
FIELD STRENGTH
selects the configuration when the meter is used to
perform series of field measurements using an external
antenna; set to
OFF
by default
For each antenna type, there is an antenna factor table
that will be applied during the series of measurements
to determine the correct field strength value.
OFF
No correction factor is used.
OMNIANT
(omni-
directional
antenna)
default factory setting for omni-directional
antennas
LOGANT
(logarithmic
antenna)
default factory setting for logarithmic
antennas
CUSTOM
User-defined
The user can define a new antenna type.