KEB COMBIVERT F5 Instruction Manual - Product Description
GB - 4
HTL - Single channel encoder interface
1.
Product description
1.1 General
The encoder interface HTL has only one channel. It operates internally with push-pull, so
only the +tracks must be connected. The instruction covers the installation of the interface
card, the connection as well as the start-up of a suitable encoder. Further information and the
parameter adjustments are described in the application manual for the inverter/servo.
1.2 Description of encoder interface
Encoder type:
Incremental encoder
Voltage level:
HTL
Inputs/Tracks:
A+, B+ (HTL)
Particularities:
Speed and acceleration monitoring
1.3 Material number
1 MF5K8G- 6 0 0 7
Term of delivery
0: installed
Z: Option, spare part
2. Encoder interface
6: none
applicable for housing size
1: D, E (circuit board 1MF5280-6007)
1.4. Scope of delivery (option or replacement delivery)
• encoder interface
• packing material