Oki CX3641 MFP Technical Reference - page 16
P
RINT
O
PTIONS
16
Print Master
Printer’s default/Yes/No
When you create a Master page from an
application and set this option to On, the
Master file prints.
Select this option to verify or confirm your
Master page.
This option is available only if Create
Master is enabled..
N
OTE
:
Applicable click charges occur
when you print the Master.
Print Queue Action
Print/Process and Hold/Print and Hold
Select the job action with a published
queue.
Select Process and Hold if you want the job
to RIP (raster image process) and not print.
Select Print and Hold to save the raster file
after printing.
This option is invalid if your job is sent to
the Direct connection.
Print Size
Fill in options
Specify the target print size (sheet size) for
your print job.
N
OTE
:
To specify the document’s page
size, use the Page Size option.
Punch
Off/Left/Top/Right
Specify where to punch your job.
Punch Holes
None/2 Holes (70 mm)/2 Holes (80 mm)/3
Holes/4 Holes/4 Holes Grouped
Specify the number and style of hole
punches for your print job.
Pure Black Text/Graphics
Pure Black/Rich Black/Normal
Select Normal to print black text and
graphics as a four-color black using
C, M, Y, and K toner, and to use normal
PostScript rendering.
Select Pure Black to print black text and
graphics as a one-color black, using black
toner only.
Select Rich Black to print black text and
graphics as richer looking black, by
layering a small amount of Cyan toner
underneath the black toner, to make the
black even darker.
To access this option, click Expert Settings
(Color tab).
For more information, see
Remove White PPT Background
Off/On
Select On when using PowerPoint to create
variable data in conjunction with
FreeForm.
Rendering Style
Photographic/Presentation/Absolute
Colorimetric/Relative Colorimetric
Specify a default color rendering dictionary
(CRD) to use when you print RGB images,
objects, and text.
To access this option, click Expert Settings
(Color tab).
For more information, see
RGB Separation
Simulation/Output
Select Simulation for RGB jobs for which
you want to simulate an output device other
than the device to which you are printing.
To access this option, click Expert Settings
(Color tab).
For more information, see
Option and settings
(default setting is underlined)
Description
Requirements, constraints,
and information