Oki ES3640eMFP Installation Manual - page 7
Other manuals for ES3640eMFP:
Configuration Manual, Installation Manual, Instructions, Software Installation Manual, Brochure & Specs, Manual, User Manual, Utility Manual, Printing Manual, Management Manual, Configuration Manual, Reference Manual, Color Manual, Handy Reference, Installation Manual, Printing Manual, Safety Information Manual, Installation Instructions, Change Instructions
Manual is about: ES3640e MFP EFI Job Management Guide
of
8
7
8. Pull the finisher platform about half way out,
then loosen the screw on the locking piece (
!
:
viewed from the opposite direction) so that it
drops through the slot below it. This keeps the
platform from moving while you attach the
finisher to it.
9. Position the finisher on the stand and attach
it with two screws from the back.
10. Lift the locking piece back up and tighten the
screw firmly. Be sure it’s out of the way and
the screw is tight—otherwise the platform
will not move freely.
11. Install the stacker, making sure the hooks
are firmly engaged and that the
lever on the
finisher is positioned above the stacker
(
!
).