Panasonic AJ-D400P Service Manual - 4. Sync
Other manuals for AJ-D400P:
Operating Instructions Manual, Operating Instructions Manual, Operating Instructions Manual
Manual is about: DVCPRO Series Camera Recorder
of
867
4. Sync
4-1. Connection
4-2. 4fsc VCO Adjustment
BOARD Sync
SPEC.
14.31818MHz ± 10Hz (NTSC)
17.734475MHz ± 10Hz (PAL)
TEST
TP11, TP17
ADJUST VR12
MODE
Camera Bar
M.EQ
Oscilloscope, Frequency Counter
1.
Disconnect GEN LOCK IN and adjust the VR12 so
that the frequency at TP17 is within specification.
2.
Input the composite signal to GEN LOCK IN and
confirm that the DC voltage at TP11 is 2.5 ± 0.5V
and stable.
4-3. SCH Phase Adjustment
BOARD Sync
SPEC.
0 ± 2°
TEST
CAM OUT
ADJUST VR5
MODE
Camera Bar
M.EQ
SCH Meter
1. Disconnect GEN LOCK IN and set the SCH Meter
to INT mode.
2. Adjust the VR5 so that the SCH is within
specification.
(PAL)
l
l
l
H
BURST
l
l
(NTSC)
H
BURST