Q-See QS434 User manual - Device Operation
DEVICE OPERATION
Model #: QS434
24 |
P a g e
7. DATE/TIME
It is highly recommended to immediately set the date and time when first setting up your system.
Figure 3.5.23
To set the date and time (Figure 3.5.23):
1) Click DATE/TIME and configure the following options:
• DATE: Enter the day, month, and year.
• DATE FORMAT: Select DD/MM/YYYY, MM/DD/YYYY, or YYYY/MM/DD
• TIME: Enter the time
• TIME FORMAT: Use the drop-down menu and select 12 HOURS or 24 HOURS
• DST: Use the drop-down menu to select ON/OFF to enable/disable Daylight Savings Time
• ZONE: Select the correct time zone based on your current location
2) Click MODIFY DATE AND TIME. Click CLOSE in the confirmation window.
3) Click APPLY. The new date and time are saved.
Daylight Savings Time
To set daylight savings time:
1) Under DST, select ON. DST options appear.
2) Under DST MODE select one of the following:
• CUSTOM: Set customized start and end times for DST (go to step 4)
• DEFAULT: The Default setting will apply DST from the second Sunday of March to the second Sunday in
November (go to step 3)