Q-See QS434 User manual - Device Operation
DEVICE OPERATION
Model #: QS434
41 |
P a g e
To access the DVR through Internet Explorer: once you have setup the network settings on the DVR to match the
settings of your router and forwarded the ports 80 and 9000 you need to modify your browser controls. You need to
allow Pop-ups. To do so go to the Internet Explorer tool bar and select the "tools" option (RED box in Figure 3.5.49),
then select the "Pop up Blocker" option and select "Turn Off Pop-up Blocker” (BLUE arrows in Figure 3.5.49). You will
also need to enable Active X controls. To do so go to the Internet Explorer tool bar and select the "tools" option, then
"Internet Options"(GREEN arrow in Figure 3.5.49), In the window that opens (Figure 3.5.50) Go to "Security" (RED
box in Figure 3.5.50), then click the "Custom Level" button (GREEN box in Figure 3.5.50), then click on OK (BLUE
arrow in Figure 3.5.50). This will open the page shown in Figure 3.5.51. On this page scroll down to the ActiveX
Controls and Plug Ins and make sure they are all set to either prompt (RED arrows) or enabled (BLUE arrows).
Figure 3.5.49
Figure 3.5.50
Figure 3.5.51